FAN7093_12 Datasheet, PDF (4/14 Pages) Fairchild Semiconductor – High-Current PN Half-Bridge Driver

Absolute Maximum Ratings
Stresses exceeding the absolute maximum ratings may damage the device. The device may not function or be
operable above the recommended operating conditions and stressing the parts to these levels is not recommended.
In addition, extended exposure to stresses above the recommended operating conditions may affect device reliability.
The absolute maximum ratings are stress ratings only. T_J = -40°C to +150°C; all voltages with respect to ground, and
positive current flowing into pin (unless otherwise specified).
Symbol
Parameter
V_BATT Supply Voltage
V_IN /V_INH Logic Input Voltage
V_SR Voltage at SR Pin
V_IS
Voltage at IS Pin
I_D(HS), I_D(LS) HS/LS Continuous Drain Current⁽⁵⁾
I_D(HS), I_D(LS) HS/LS Pulsed Drain Current⁽⁵⁾
I_D(HS), I_D(LS) HS/LS PWM Current⁽⁵⁾
Temperatures
T_J
T_STG
Junction Temperature
Storage Temperature
Electrostatic Discharge Capability (ESD)
ESD Human Body Model, JESD22-A114⁽⁶⁾
Condition
T_C < 85°C
T_C < 85°C Single Pulse < 5 µs
T_C < 125°C f=1 kHz, DC=50%
Min.
-0.3
-0.3
-0.3
-0.3
Typ.
-46/46
-90/90
-55/55
Max.
45
45
1.5
7.5
-40
150
-55
150
IN, /INH, SR, IS
-2
2
OUT, GND, VBATT
-6
6
Notes:
4. Not to production tested; specified by design.
5. Maximum reachable current may be smaller, depending on current-limit level.
6. ESD susceptibility, HBM according to AEC_Q100-0042 / JESD22-A114-B (1.5 kΩ, 100 pF).
Unit
V
V
V
V
A
A
A
°C
°C
kV
Recommended Operating Conditions
The Recommended Operating Conditions table defines the conditions for actual device operation. Recommended
operating conditions are specified to ensure optimal performance to the datasheet specifications. Fairchild does not
recommend exceeding them or designing to Absolute Maximum Ratings.
Symbol
Parameter
V_BATT(NOM) Supply Voltage Range for Nominal Operation
V_BATT(EXT) Supply Voltage Range for Extended Operation
T_J
Ï´_JC(LS)
Ï´_JC(HS)
Junction Temperature
Thermal Resistance, Junction-Case, Low-Side
Switch Ï´_JC(LS)=∆T_J (LS) / P_V (LS)⁽⁷⁾
Thermal Resistance, Junction-Case, High-Side
Switch Ï´_JC(HS)=∆T_J (HS) / P_V (HS)⁽⁷⁾
Ï´_JA Thermal Resistance, Junction-Ambient⁽⁷⁾
Note:
7. Not subject to production test; specified by design.
Condition
Parameter
Deviations Possible
Min.
7
5.5
-40
Typ.
Max.
18
28.0
150
Unit
V
V
°C
0.8
°C/W
Using Pad Area of
One Square Inch of
Two-Ounce Copper
0.45
40
°C/W
°C/W
© 2011 Fairchild Semiconductor Corporation
FAN7093 • Rev. 1.0.4
4
www.fairchildsemi.com