FAN7024 Datasheet, PDF (4/16 Pages) Fairchild Semiconductor – 675mW CMOS Mono Power Amplifier with Shutdown

FAN7024
Electrical Characteristics(Note1,2)
(RL = 8Ω, Ta = 25°C, unless otherwise specified)
Parameter
Symbol
Conditions
VDD = 5.0V, UNLESS OTHERWISE SPECIFIED
Quiescent Power Supply Current
IDD
Shutdown Current
ISD
Output Offset Voltage
VOS
Output Power
PO
Total Harmonic Distortion+Noise THD+N
Power Supply Rejection Ratio
PSRR
VIN = 0V,IO = 0A
VSD = VDD
VIN = 0V
THD = 1%(Max.), f = 1kHz
PO = 500mWrms, Av=6dB,
20Hz<f<20kHz, BW<80kHz
Vripple=200mVsinp-p
f=217Hz(Terminated input)
f=1kHz(Terminated input)
f=217Hz(Unterminated input)
f=1kHz(Unterminated input)
VDD = 3.3V, UNLESS OTHERWISE SPECIFIED
Quiescent Power Supply Current
IDD
Shutdown Current
ISD
Output Offset Voltage
VOS
Output Power
PO
Total Harmonic Distortion+Noise THD+N
Power Supply Rejection Ratio
PSRR
VIN = 0V,IO = 0A
VSD = VDD
VIN = 0V
THD = 1%(Max.), f = 1kHz
PO = 250mWrms, Av=6dB,
20Hz<f<20kHz, BW<80kHz
Vripple=200mVsinp-p
f=217Hz(Terminated input)
f=1kHz(Terminated input)
f=217Hz(Unterminated input)
f=1kHz(Unterminated input)
VDD = 2.6V, UNLESS OTHERWISE SPECIFIED
Quiescent Power Supply Current
IDD
Shutdown Current
ISD
Output Offset Voltage
VOS
Output Power
PO
Total Harmonic Distortion+Noise THD+N
Power Supply Rejection Ratio
PSRR
VIN = 0V,IO = 0A
VSD = VDD
VIN = 0V
THD = 1%(Max.), f = 1kHz
PO = 100mWrms, Av=6dB,
20Hz<f<20kHz, BW<80kHz
Vripple=200mVsinp-p
f=217Hz(Terminated input)
f=1kHz(Terminated input)
Min. Typ. Max. Unit
- 2.3 5.5 mA
- 0.1 1.0 µA
-
0 50 mV
- 675 - mW
-
0.2
-
%
- 63 -
- 65 - dB
- 70 -
- 70 -
- 1.9 4 mA
- 0.1 1.0 µA
-
0 50 mV
- 265 - mW
-
0.3
-
%
- 63 -
- 65 - dB
- 70 -
- 70 -
- 1.7 3.5 mA
- 0.1 1.0 µA
-
0 50 mV
- 130 - mW
-
0.4
-
%
- 63 - dB
- 65 -
Note 1 : All voltages are measured with respect to the ground pin, unless otherwise specified.
Note 2 : Absolute Maximum Ratings indicate limits beyond which damage to the device may occur. Recommended Operating
Conditions indicate conditions for which the device is functional, but do not guarantee specific performance limits. Electrical
Characteristics state DC and AC electrical specifications under particular test conditions which guarantee specific
performance limits. This assumes that the device is whitin the Operating Ratings. Specifications are not guaranteed for
parameters where no limit is given, however, the typical value is a good indication of device performance.
4