FAN4147SX Datasheet, PDF (4/10 Pages) Fairchild Semiconductor – Ground Fault Interrupter

Absolute Maximum Ratings
Stresses exceeding the absolute maximum ratings may damage the device. The device may not function or be
operable above the recommended operating conditions and stressing the parts to these levels is not recommended.
In addition, extended exposure to stresses above the recommended operating conditions may affect device reliability.
The absolute maximum ratings are stress ratings only.
Symbol
Parameter
I_CC Continuous Supply Current, Line to Neutral
Continuous Supply Voltage, Line to Neutral
V_CC
Continuous Voltage to Neutral, All Other Pins
T_STG
ESD
Storage Temperature Range
Electrostatic Discharge
Protection Level
Human Body Model, JESD22-A114
Charged Device Model, JESD22-C101
Machine Model, JESD22-A115
Min.
-1.2
-0.8
-65
Max.
15
16
15
+150
2.5
1.0
0.2
Unit
mA
V
V
°C
kV
Recommended Operating Conditions
The Recommended Operating Conditions define conditions for actual device operation. Recommended operating
conditions are specified to ensure optimal performance to the datasheet specifications. Fairchild does not recommend
exceeding them or designing to Absolute Maximum Ratings. (Unless otherwise specified, refer to figure 2.)
Symbol
Parameter
Conditions
DC Electrical Parameters (T_A=25°C, I_shunt=1mA)
V_REG
Power Supply Shunt Regulator
Voltage
Line to Neutral
Line to Neutral I_shunt=-2mA
I_Q
V_REF
V_TH
V_OS
I_OS
G
f_GBW
V_SW+
Quiescent Current
Reference Voltage
Trip Threshold
Amplifier Offset
Amplifier Input Offset⁽³⁾
Amplifier DC Gain⁽³⁾
Amplifier Gain Bandwidth⁽³⁾
Amplifier Positive Voltage Swing
Line to Neutral=10V
VREF to Neutral
AmpOut to VREF
Gain=1000
Design Value
Design Value
Design Value
AmpOut to VREF, I_FAULT=10A
Min. Typ. Max. Unit
12.2 12.7 13.2 V
-0.9 -0.7
V
350 400
5.8 6.0
3.4 3.5
-450 0
-50
0
100
1.5
450 µA
6.2
V
3.6
V
450 µV
50 nA
dB
MHz
4.0
V
V_SW- Amplifier Negative Voltage Swing VREF to AmpOut, I_FAULT=-10A
4.0
V
I_SINK
I_SRL
t_d
R_OUT
Amplifier Current Sink
Amplifier Current Source
Delay Filter
SCR Output Resistance
AmpOut=V_REF + 3V,
V_FB=V_REF + 100mV
AmpOut=V_REF – 3V,
V_FB=V_REF - 100mV
Delay from C₁ trip to SCR L->H
SCR to Neutral=250mV,
AmpOut=V_REF
400
µA
400
µA
0.7 1.0 1.3 ms
0.5 1.0 K
V_OUT SCR Output Voltage
SCR to Neutral AmpOut=V_REF
1
10 mV
SCR to Neutral AmpOut=V_REF +4V 2.5
V
I_OUT SCR Output Current
SCR to Neutral=1V,
AmpOut=V_REF + 4V
Note:
3. Guaranteed by design; not tested in production.
© 2010 Fairchild Semiconductor Corporation
FAN4147 • Rev. 1.0.1
4
350 500
µA
www.fairchildsemi.com