FAN100_09 Datasheet, PDF (4/16 Pages) Fairchild Semiconductor – Primary-Side-Control PWM Controller

Absolute Maximum Ratings
Stresses exceeding the absolute maximum ratings may damage the device. The device may not function or be
operable above the recommended operating conditions and stressing the parts to these levels is not recommended.
In addition, extended exposure to stresses above the recommended operating conditions may affect device reliability.
The absolute maximum ratings are stress ratings only.
Symbol
Parameter
Min.
Max.
Unit
VDD
DC Supply Voltage^(1,2)
30
V
VVS VS Pin Input Voltage
-0.3
7.0
V
VCS CS Pin Input Voltage
-0.3
7.0
V
VCOMV Voltage Error Amplifier Output Voltage
-0.3
7.0
V
VCOMI
PD
Voltage Error Amplifier Output Voltage
Power Dissipation (TA＜50°C)
-0.3
7.0
V
660
mW
ΘJA Thermal Resistance (Junction-to-Air)
150
°C /W
ΘJC Thermal Resistance (Junction-to-Case)
39
°C /W
TJ
Operating Junction Temperature
+150
°C
TSTG Storage Temperature Range
-55
+150
°C
TL
Lead Temperature (Wave Soldering or IR, 10 Seconds)
+260
°C
ESD Electrostatic Discharge Capability
Human Body Model,
JEDEC: JESD22-A114
Charged Device Model,
JEDEC: JESD22-C101
4.5
KV
2.0
Notes:
1. Stresses beyond those listed under Absolute Maximum Ratings may cause permanent damage to the device.
2. All voltage values, except differential voltages, are given with respect to GND pin.
Recommended Operating Conditions
The Recommended Operating Conditions table defines the conditions for actual device operation. Recommended
operating conditions are specified to ensure optimal performance to the datasheet specifications. Fairchild does not
recommend exceeding them or designing to Absolute Maximum Ratings.
Symbol
Parameter
TA
Operating Ambient Temperature
Conditions
Min.
-40
Typ.
Max.
+125
Unit
°C
© 2009 Fairchild Semiconductor Corporation
FAN100 Rev. 1.0.2
4
www.fairchildsemi.com