CNY17F23S Datasheet, PDF (4/12 Pages) Fairchild Semiconductor – 6-PIN DIP OPTOCOUPLERS FOR POWER SUPPLY APPLICATIONS

MOC8101
MOC8105
CNY17F-1
MOC8102
MOC8106
CNY17F-2
6-PIN DIP OPTOCOUPLERS FOR
POWER SUPPLY APPLICATIONS
(NO BASE CONNECTION)
MOC8103
MOC8107
CNY17F-3
MOC8104
MOC8108
CNY17F-4
TRANSFER CHARACTERISTICS (T_A =25°C Unless otherwise specified)
AC Characteristic
Test Conditions Symbol Min Typ** Max Unit
NON-SATURATED SWITCHING TIME
Turn-on Time CNY17F-1/2/3/4 Only
(R_L = 100 Ω, I_C = 2 mA) t_on
—
2
10
µs
Turn-off Time CNY17F-1/2/3/4 Only
(V_CC = 10 V) t_off
—
3
10
Turn-On Time
MOC8101-5
MOC8106-8
(I_C = 2.0 mA, V_CC = 10 V, R_L = 100 Ω)⁽³⁾
t_on
—
2
20
—
µs
Turn-Off Time
MOC8101-5
MOC8106-8
(I_C = 2.0 mA, V_CC = 10 V, R_L = 100 Ω)⁽³⁾
t_off
—
3
20
—
Rise Time
All Devices
(I_C = 2.0 mA, V_CC = 10 V, R_L = 100 Ω)⁽³⁾
t_r
Fall Time
All Devices
(I_C = 2.0 mA, V_CC = 10 V, R_L = 100 Ω)⁽³⁾
t_f
SATURATED SWITCHING TIMES
—
1
—
µs
—
2
—
Turn-on Time
CNY17F-1
CNY17F-2
CNY17F-3
CNY17F-4
(I_F = 20 mA, V_CE = 0.4 V)
—
—
5.5
t_on
µs
(I_F = 10 mA, V_CE = 0.4 V)
—
—
8.0
Rise Time
CNY17F-1
CNY17F-2
CNY17F-3
CNY17F-4
(I_F = 20 mA, V_CE = 0.4 V)
t_r
(I_F = 20 mA, V_CE = 0.4 V)
—
—
4.0
µs
Turn-off Time
CNY17F-1
CNY17F-2
CNY17F-3
CNY17F-4
(I_F = 20 mA, V_CE = 0.4 V)
—
—
34
t_off
µs
(I_F = 10 mA, V_CE = 0.4 V)
—
—
39
Fall Time
CNY17F-1
CNY17F-2
CNY17F-3
CNY17F-4
(I_F = 20 mA, V_CE = 0.4 V)
t_f
(I_F = 10 mA, V_CE = 0.4 V)
—
—
20
µs
—
—
24
** All typicals at T_A = 25°C
NOTES:
1. Always design to the specified minimum/maximum electrical limits (where applicable).
2. Current Transfer Ratio (CTR) = I_C/I_F x 100%.
3. For test circuit setup and waveforms, refer to Figure 11.
4, For this test, Pins 1 and 2 are common, and Pins 4 are 5 are common.
© 2004 Fairchild Semiconductor Corporation
Page 4 of 12
1/21/04