FODM8071 Datasheet, PDF (3/13 Pages) Fairchild Semiconductor – 3.3V/5V Logic Gate Output Optocoupler with High Noise Immunity

Absolute Maximum Ratings (T_A = 25ºC unless otherwise specified)
Stresses exceeding the absolute maximum ratings may damage the device. The device may not function or be
operable above the recommended operating conditions and stressing the parts to these levels is not recommended.
In addition, extended exposure to stresses above the recommended operating conditions may affect device reliability.
The absolute maximum ratings are stress ratings only. .
Symbol
T_STG
T_OPR
T_J
T_SOL
I_F
V_R
V_DD
V_O
I_O
PD_I
PD_O
Parameter
Storage Temperature
Operating Temperature
Junction Temperature
Lead Solder Temperature (Refer to Reflow
Temperature Profile)
Forward Current
Reverse Voltage
Supply Voltage
Output Voltage
Average Output Current
Input Power Dissipation⁽¹⁾⁽³⁾
Output Power Dissipation⁽²⁾⁽³⁾
Value
-40 to +125
-40 to +110
-40 to +125
260 for 10sec
20
5
0 to 6.0
-0.5 to V_DD+0.5
10
40
70
Units
ºC
ºC
ºC
ºC
mA
V
V
V
mA
mW
mW
Recommended Operating Conditions
The Recommended Operating Conditions table defines the conditions for actual device operation. Recommended
operating conditions are specified to ensure optimal performance to the datasheet specifications. Fairchild does not
recommend exceeding them or designing to Absolute Maximum Ratings.
Symbol
T_A
V_DD
V_FL
I_FH
I_OL
Parameter
Ambient Operating Temperature
Supply Voltages⁽⁴⁾
Logic Low Input Voltage
Logic High Input Current
Logic Low Output Current
Min.
-40
3.0
0
5
0
Max.
+110
5.5
0.8
16
7
Unit
ºC
V
V
mA
mA
Isolation Characteristics
(Apply over all recommended conditions, typical value is measured at T_A = 25ºC)
Symbol
Parameter
Conditions
Min.
V_ISO
R_ISO
C_ISO
Input-Output Isolation Voltage freq = 60Hz, t = 1.0min,
I_I-O ≤ 10µA⁽⁵⁾⁽⁶⁾
Isolation Resistance
V_I-O = 500V⁽⁵⁾
Isolation Capacitance
V_I-O = 0V, freq = 1.0MHz⁽⁵⁾
3750
10¹¹
Typ.
0.2
Max.
Units
Vac_RMS
Ω
pF
Notes:
1. Derate linearly from 95˚C at a rate of -1.4mW/˚C
2. Derate linearly from 100˚C at a rate of -3.47mW/˚C.
3. Functional operation under these conditions is not implied. Permanent damage may occur if the device is subjected
to conditions outside these ratings.
4. 0.1µF bypass capacitor must be connected between 4 and 6.
5. Device is considered a two terminal device: Pins 1, and 3 are shorted together and Pins 4, 5, and 6 are shorted
together.
6. 3,750 VAC_RMS for 1 minute duration is equivalent to 4,500 VAC_RMS for 1 second duration.
©2008 Fairchild Semiconductor Corporation
FODM8071 Rev. 1.0.6
3
www.fairchildsemi.com