FODM8061_10 Datasheet, PDF (3/12 Pages) Fairchild Semiconductor – High Noise Immunity, 3.3V/5V, 10Mbit/sec Logic Gate Output (Open Collector) Optocoupler

Absolute Maximum Ratings (T_A=25ºC unless otherwise specified)
Stresses exceeding the absolute maximum ratings may damage the device. The device may not function or be
operable above the recommended operating conditions and stressing the parts to these levels is not recommended. In
addition, extended exposure to stresses above the recommended operating conditions may affect device reliability.
The absolute maximum ratings are stress ratings only.
Symbol
T_STG
T_OPR
T_J
T_SOL
I_F
V_R
V_CC
V_O
I_O
PD_I
PD_O
Parameter
Storage Temperature
Operating Temperature
Junction Temperature
Lead Solder Temperature
(Refer to Reflow Temperature Profile)
Forward Current
Reverse Voltage
Supply Voltage
Output Voltage
Average Output Current
Input Power Dissipation⁽¹⁾⁽²⁾
Output Power Dissipation⁽¹⁾⁽²⁾
Value
-40 to +125
-40 to +110
-40 to +125
260 for 10sec
50
5.0
0 to 7.0
-0.5 to V_CC+0.5
50
100
85
Units
ºC
ºC
ºC
ºC
mA
V
V
V
mA
mW
mW
Recommended Operating Conditions
The Recommended Operating Conditions table defines the conditions for actual device operation. Recommended
operating conditions are specified to ensure optimal performance to the datasheet specifications. Fairchild does not
recommend exceeding them or designing to Absolute Maximum Ratings.
Symbol
T_A
V_CC, V_DD
V_FL
I_FH
I_FL
N
R_L
Parameter
Ambient Operating Temperature
Supply Voltages⁽³⁾
Logic Low Input Voltage
Logic High Input Current⁽⁴⁾
Logic Low Input Current
Fan Out (at R_L = 1kΩ)
Output Pull-up Resistor
Min.
-40
3.0
0
6.3
330
Max.
+110
5.5
0.8
15
250
5
4k
Unit
ºC
V
V
mA
µA
TTL Loads
Ω
Isolation Characteristics (T_A=25ºC)
Symbol
Parameter
Test Conditions
V_ISO Input-Output Isolation Voltage
R_ISO
C_ISO
Isolation Resistance
Isolation Capacitance
freq= 60Hz, t = 1.0min,
I_I-O ≤ 10µA⁽⁵⁾⁽⁶⁾
V_I-O = 500V⁽⁵⁾
V_I-O = 0V, freq=1.0MHz⁽⁵⁾
Min.
3750
Typ.
10¹²
0.6
Max. Units
Vac_RMS
Ω
pF
Notes:
1. No derate required to 110ºC.
2. Functional operation under these conditions is not implied. Permanent damage may occur if the device is subjected
to conditions outside these ratings.
3. 0.1µF bypass capacitor must be connected between pins 4 and 6.
4. Recommended I_FH is 9.3mA for operation above T_A =100ºC.
5. Device is considered a two terminal device: Pins 1 and 3 are shorted, and Pins 4, 5, and 6 are shorted together.
6. 3,750 VAC_RMS for 1 minute duration is equivalent to 4,500 VAC_RMS for 1 second duration.
©2009 Fairchild Semiconductor Corporation
FODM8061 Rev. 1.0.3
3
www.fairchildsemi.com