English
Language : 

FODM30XX Datasheet, PDF (3/11 Pages) Fairchild Semiconductor – 4-Pin Full Pitch Mini-Flat Package Random-Phase Triac Driver Output Optocouplers
◁
Electrical Characteristics (TA = 25°C)
Individual Component Characteristics
Symbol
Parameter
Test Conditions
EMITTER
VF Input Forward Voltage
IR Reverse Leakage Current
DETECTOR
IDRM Peak Blocking Current Either
Direction
dV/dt Critical Rate of Rise of
Off-State Voltage
IF = 10mA
VR = 3V, TA = 25°C
Rated VDRM, IF = 0(1)
IF = 0 (Figure 8)(2)
Device Min. Typ.* Max. Unit
All
1.20 1.5
V
All
0.01 100 µA
All
2
FODM3011,
10
FODM3012,
FODM3022,
FODM3023
FODM3052, 1,000
FODM3053
100 nA
V/µs
Transfer Characteristics (TA = 25°C)
Symbol DC Characteristics Test Conditions
IFT LED Trigger Current
Main Terminal
Voltage = 3V(3)
IH
Holding Current, Either
Direction
VTM Peak On-State Voltage Either ITM = 100mA peak
Direction
Device
FODM3011,
FODM3022,
FODM3052
FODM3012,
FODM3023,
FODM3053
All
All
Min.
Typ.* Max.
10
5
300
1.7
3
Unit
mA
µA
V
Isolation Characteristics
Symbol
Characteristic
VISO
Steady State Isolation
Voltage
Test Conditions
1 Minute,
R.H. = 40% to 60%
Device
All
Min. Typ.* Max. Unit
3750
VRMS
*All typicals at TA = 25°C
Notes:
1. Test voltage must be applied within dv/dt rating.
2. This is static dv/dt. See Figure 1 for test circuit Commutating dv/dt is function of the load-driving thyristor(s) only.
3. All devices are guaranteed to trigger at an IF value less than or equal to max IFT. Therefore, recommended operating
IF lies between max IFT (10mA for FODM3011, FODM3022, and FODM3052, 5mA for FODM3012, FODM3023,
and FODM3053) and absolute max IF (60mA).
3
FODM30XX Rev. 1.0.5
www.fairchildsemi.com
 ▷