|
FMS6366 Datasheet, PDF (3/7 Pages) Fairchild Semiconductor – Selectable YPbPr HD/SD 4:2:2 Video Filter Driver with Y, C and Composite Outputs | |||
|
◁ |
FMS6366
DATA SHEET
Symbol
fCHD4
fCHD2
fSBHD
tpdHD4
tpdHD2
t42HDYPbPr
Parameter
-3dB Bandwidth for HD
Attenuation: HD (stopband reject)1
Prop Delay for HD
4:2:2 Filter delay
(compensate in the digital domain)
Note:
1. 100% tested at 25°C
Conditions
Y1
Pb, Pr
All Channels at f = 74.25MHz
Y1 delay In to Out at 400kHz
Pb, Pr delay In to Out at 400kHz
Y1 to Pb/Pr delay
Min Typ Max Units
31.5
MHz
16
MHz
35 40
dB
25
ns
40
ns
15
ns
Absolute Maximum Ratings (beyond which the device may be damaged)
Parameter
DC Supply Voltage
Analog and Digital I/O
Output Current Any One Channel, Do Not Exceed
Min
Max
Units
-0.3
6
V
-0.3
VCC + 0.3
V
50
mA
Reliability Information
Parameter
Min
Typ
Max
Units
Junction Temperature
150
°C
Storage Temperature Range
-65
150
°C
Lead Temperature (Soldering, 10s)
300
°C
Thermal Resistance (ÎJA), JEDEC Standard Multi-layer
Test Boards, Still Air
47
°C/W
Recommended Operating Conditions
Parameter
Operating Temperature Range
VCC Range
Min
Typ
Max
Units
0
70
°C
4.75
5.0
5.25
V
Description
The FMS6366 offers comprehensive ï¬ltering for set top box
or DVD applications. This part consists of triple 4:2:2 6th
order ï¬lters with selectable 30/15MHz or 8/4MHz frequen-
cies for YPbPr and a dual 8MHz ï¬lter for YC with a compos-
ite summer. Two-to-one multiplexers are provided on the
triple ï¬lters as well as provisions for auxiliary input to the
composite channel. The triple ï¬lters are intended for YPbPr
signals. All channels accept DC coupled ground-referenced
1Vpp signals. The ï¬lters output 2Vpp signals into AC cou-
pled terminated loads.
The FMS6366 is a next generation ï¬lter solution from Fair-
child Semiconductor addressing the expanding ï¬ltering needs
for set top boxes, and DVD players. The product provides
selectable 4:2:2 HD/SD ï¬ltering on the YPbPr channels.
Thus, the FMS6366 addresses the requirement for a single
set top box to be compatible with a variety of resolution stan-
dards. Additionally, the product provides additional ï¬lters
for Y, C, and Composite Video (CV) outputs. Multiplexers
on the YPbPr and CV channels provide further ï¬exibility.
For DVD applications, the product provides ï¬ltering and
output drive ampliï¬cation for 6 channels of outputs. These
include Y1, Pb, Pr, Y2, C, and CV outputs.
For Set top boxes, this product provides two channels of ï¬l-
tered video with the ï¬exibility of selectable high order ï¬lter-
ing for multiple resolution standards. Additional ï¬exibility is
provided by the Y (Luma) and C (Chroma) ï¬lters with a
composite summer.
All channels provide 6dB gain, accept 1V ground referenced
inputs, and drive AC coupled loads.
REV. 1B September 17, 2004
3
|
▷ |