CD4046BC Datasheet, PDF (3/14 Pages) Fairchild Semiconductor – Micropower Phase-Locked Loop

Absolute Maximum Ratings(Note 1)
(Note 2)
DC Supply Voltage (V_DD)
Input Voltage (V_IN)
Storage Temperature Range (T_S)
Power Dissipation (P_D)
Dual-In-Line
Small Outline
Lead Temperature (T_L)
(Soldering, 10 seconds)
−0.5 to +18 V_DC
−0.5 to V_DD +0.5 V_DC
−65°C to +150°C
700 mW
500 mW
260°C
Recommended Operating
Conditions (Note 2)
DC Supply Voltage (V_DD)
3 to 15 V_DC
Input Voltage (V_IN)
0 to V_DD V_DC
Operating Temperature Range (T_A)
−55°C to +125°C
Note 1: “Absolute Maximum Ratings” are those values beyond which the
safety of the device cannot be guaranteed. They are not meant to imply
that the devices should be operated at these limits. The table of “Recom-
mended Operating Conditions” and “Electrical Characteristics” provides
conditions for actual device operation.
Note 2: V_SS = 0V unless otherwise specified.
DC Electrical Characteristics (Note 2)
Symbol
Parameter
Conditions
I_DD
Quiescent Device Current
Pin 5 = V_DD, Pin 14 = V_DD,
Pin 3, 9 = V_SS
V_DD = 5V
V_DD = 10V
V_DD = 15V
Pin 5 = V_DD, Pin 14 = Open,
Pin 3, 9 = V_SS
V_DD = 5V
V_DD = 10V
V_DD = 15V
V_OL
LOW Level Output Voltage
V_DD = 5V
V_DD = 10V
V_DD = 15V
V_OH
HIGH Level Output Voltage
V_DD = 5V
V_DD = 10V
V_DD = 15V
V_IL
LOW Level Input Voltage
V_DD = 5V, V_O = 0.5V or 4.5V
Comparator and Signal In
V_DD = 10V, V_O = 1V or 9V
V_DD = 15V, V_O = 1.5V or 13.5V
V_IH
HIGH Level Input Voltage
V_DD = 5V, V_O = 0.5V or 4.5V
Comparator and Signal In
V_DD = 10V, V_O = 1V or 9V
V_DD = 15V, V_O = 1.5V or 13.5V
I_OL
LOW Level Output Current
V_DD = 5V, V_O = 0.4V
(Note 4)
V_DD = 10V, V_O = 0.5V
V_DD = 15V, V_O = 1.5V
I_OH
HIGH Level Output Current
V_DD = 5V, V_O = 4.6V
(Note 4)
V_DD = 10V, V_O = 9.5V
V_DD = 15V, V_O = 13.5V
I_IN
Input Current
All Inputs Except Signal Input
V_DD = 15V, V_IN = 0V
V_DD = 15V, V_IN = 15V
C_IN
Input Capacitance
P_T
Total Power Dissipation
Any Input (Note 3)
f_o = 10 kHz, R1 = 1 MΩ,
R2 = ∞, VCO_IN = V_CC/2
V_DD = 5V
V_DD = 10V
V_DD = 15V
Note 3: Capacitance is guaranteed by periodic testing.
Note 4: I_OH and I_OL are tested one output at a time.
−55°C
Min Max
+25°C
Min Typ Max
+125°C
Units
Min Max
5
0.005 5
10
0.01 10
20
0.015 20
150
300 µA
600
45
5
35
185
450
20 350
650 µA
1200
50 900
1500
0.05
0 0.05
0.05
0.05
0 0.05
0.05 V
0.05
0 0.05
0.05
4.95
4.95 5
4.95
9.95
9.95 10
9.95
V
14.95
14.95 15
14.95
1.5
2.25 1.5
1.5
3.0
4.5 3.0
3.0
V
4.0
6.25 4.0
4.0
3.5
3.5 2.75
3.5
7.0
7.0 5.5
7.0
V
11.0
11.0 8.25
11.0
0.64
0.51 0.88
0.36
1.6
1.3 2.25
0.9
mA
4.2
3.4 8.8
2.4
−0.64
−0.51 −0.88
−0.36
−1.6
−1.3 −2.25
−0.9
mA
−4.2
−3.4 −8.8
−2.4
−0.1
0.1
−10^−5 −0.1
10^−5 0.1
−1.0
µA
1.0
7.5 pF
0.07
0.6
mW
2.4
3
www.fairchildsemi.com