English
Language : 

FODM3053V Datasheet, PDF (2/8 Pages) Fairchild Semiconductor – 4-Pin Full Pitch Mini-Flat Package Random Phase Triac Driver Output Optocouplers
◁
Absolute Maximum Ratings (TA = 25°C unless otherwise specified)
Parameter
Symbol
Value
TOTAL PACKAGE
Storage Temperature
Junction Temperature
Operating Temperature
EMITTER
T STG
TJ
TOPR
-40 to +125
125
-40 to +100
Continuous Forward Current
Peak Forward Current (1 µs pulse, 300 pps.)
Reverse Input Voltage
Power Dissipation
(No derating required over operating temp. range)
IF (avg)
60
IF (pk)
1
VR
3
PD
100
DETECTOR
On-State RMS Current
Off-State Output Terminal Voltage
Power Dissipation
(No derating required over operating temp. range)
I T(RMS)
70
V DRM
600
PD
250
Units
°C
°C
°C
mA
A
V
mW
mA (RMS)
V
mW
Electrical Characteristics (TA = 25°C Unless otherwise specified)
Individual Component Characteristics
Parameter
Test Conditions Symbol Device
EMITTER
Input Forward Voltage
Reverse Leakage Current
DETECTOR
IF = 10 mA
VR = 3 V
VF
All
IR
All
Peak Blocking Current Either Direction VDRM = 600V, IF = 0 (note 1) IDRM
All
Peak On-State Voltage Either Direction
ITM = 100mA peak
V TM
All
Critical Rate of Rise of Off-State Voltage IF = 0 (Figure 8, note 2)
dV/dt
All
Min
1000
Typ*
1.20
0.01
3
2.0
Max
1.5
100
100
2.5
Unit
V
µA
nA
V
V/µs
Transfer Characteristics (TA = 25°C Unless otherwise specified)
DC Characteristics
Test Conditions Symbol Device Min Typ* Max Unit
LED Trigger Current
Main Terminal
IFT
FODM3051
Voltage = 3V (note 3)
FODM3052
15
mA
10
FODM3053
5
Holding Current, Either Direction
IH
All
300
µA
Isolation Characteristics (TA = 25°C Unless otherwise specified)
Characteristic
Test Conditions Symbol Device Min Typ* Max Unit
Steady State Isolation Voltage
t = 1 Minute
V ISO
All
3750
V(RMS)
* All typicals at TA = 25°C
Note
1. Test voltage must be applied within dv/dt rating.
2. This is static dv/dt. See Figure 1 for test circuit. Commutating dv/dt is function of the load-driving thyristor(s) only.
3. All devices are guaranteed to trigger at an IF value less than or equal to max IFT. Therefore, recommended operating IF lies
between max IFT (15 mA for FODM3051, 10 mA for FODM3052, 5 mA for FODM3053) and absolute max IF (60 mA).
2
FODM3051, FODM3052, FODM3053 Rev. 1.0.0
www.fairchildsemi.com
 ▷