 English |
|
|
|
|
|
|
|
| FODM3053 Datasheet, PDF (2/8 Pages) Fairchild Semiconductor – 4-PIN FULL PITCH MINI-FLAT PACKAGE RANDOM PHASE TRIAC DRIVER OUTPUT OPTOCOUPLERS | |||
| |||
| ◁ |
4-PIN FULL PITCH MINI-FLAT PACKAGE
RANDOM PHASE TRIAC DRIVER
OUTPUT OPTOCOUPLERS
FODM3051
FODM3052
FODM3053
ELECTRICAL CHARACTERISTICS (TA = 25°C Unless otherwise speciï¬ed)
INDIVIDUAL COMPONENT CHARACTERISTICS
Parameter
EMITTER
Input Forward Voltage
Reverse Leakage Current
DETECTOR
Peak Blocking Current Either Direction
Peak On-State Voltage Either Direction
Critical Rate of Rise of Off-State Voltage
Test Conditions
IF = 10 mA
VR = 3 V
VDRM = 600V, IF = 0 (note 1)
ITM = 100mA peak
IF = 0 (Figure 8, note 2)
Symbol Device
VF
All
IR
All
IDRM
All
VTM
All
dV/dt
All
Min
1000
Typ*
1.20
0.01
3
2.0
Max
1.5
100
100
2.5
Unit
V
µA
nA
V
V/µs
TRANSFER CHARACTERISTICS (TA = 25°C Unless otherwise speciï¬ed)
DC Characteristics
Test Conditions
Symbol
Device
Min Typ* Max Unit
LED Trigger Current
FODM3051
Main Terminal
Voltage = 3V (note 3)
IFT
FODM3052
FODM3053
Holding Current, Either Direc-
tion
IH
All
15
10
mA
5
300
µA
ISOLATION CHARACTERISTICS (TA = 25°C Unless otherwise speciï¬ed)
Characteristic
Test Conditions
Symbol
Device
Min Typ* Max Unit
Steady State Isolation Voltage
* All typicals at TA = 25°C
t = 1 Minute
VISO
All
3750
V(RMS)
Note
1. Test voltage must be applied within dv/dt rating.
2. This is static dv/dt. See Figure 1 for test circuit. Commutating dv/dt is function of the load-driving thyristor(s) only.
3. All devices are guaranteed to trigger at an IF value less than or equal to max IFT. Therefore, recommended operating IF lies
between max IFT (15 mA for FODM3051, 10 mA for FODM3052, 5 mA for FODM3053) and absolute max IF (60 mA).
© 2003 Fairchild Semiconductor Corporation
Page 2 of 8
11/10/03
|
▷ |
German
Russian
Spanish
Italian
Polish
Chinese
Japanese
Korean
French
Portuguese