FODM3010 Datasheet, PDF (2/10 Pages) Fairchild Semiconductor – 4-PIN FULL PITCH MINI-FLAT PACKAGE RANDOM-PHASE TRIAC DRIVER OUTPUT OPTOCOUPLERS

4-PIN FULL PITCH MINI-FLAT PACKAGE
RANDOM-PHASE TRIAC DRIVER
OUTPUT OPTOCOUPLERS
FODM3010 FODM3011 FODM3012 FODM3021
FODM3022
FODM3023
ELECTRICAL CHARACTERISTICS (T_A = 25°C)
INDIVIDUAL COMPONENT CHARACTERISTICS
Parameter
EMITTER
Input Forward Voltage
Reverse Leakage Current
DETECTOR
Peak Blocking Current Either Direction
Peak On-State Voltage Either Direction
Critical Rate of Rise of Off-State Voltage
Test Conditions Symbol Device Min Typ* Max Unit
I_F = 10 mA V_F
All
V_R = 3 V, T_A = 25°C I_R
All
Rated V_DRM, I_F = 0 (note 1) I_DRM
All
I_TM = 100mA peak V_TM
All
I_F = 0 (Figure 8, note 2) dV/dt
All
1.20 1.5
V
0.01 100 µA
2
100 nA
1.7
3
V
10
V/µs
TRANSFER CHARACTERISTICS (T_A = 25°C)
DC Characteristics
Test Conditions Symbol
Device
Min Typ* Max Unit
LED Trigger Current
Main Terminal
Voltage = 3V (note 3)
I_FT
Holding Current, Either Direc-
tion
I_H
FODM3010
FODM3021
FODM3011
FODM3022
FODM3012
FODM3023
All
15
10
mA
5
300
µA
ISOLATION CHARACTERISTICS
Characteristic
Test Conditions Symbol
Device
Min Typ* Max Unit
Steady State Isolation Voltage
* All typicals at TA = 25°C
(1 Minute)
V_ISO
All
3750
VRMS
Note
1. Test voltage must be applied within dv/dt rating.
2. This is static dv/dt. See Figure 1 for test circuit Commutating dv/dt is function of the load-driving thyristor(s) only.
3. All devices are guaranteed to trigger at an I_F value less than or equal to max I_FT. Therefore, recommended operating I_F lies
between max I_FT (15 mA for FODM3010 and FODM3021, 10 mA for FODM3011 and FODM3022, 5 mA for FODM3012 and
FODM3023) and absolute max I_F (60 mA).
© 2003 Fairchild Semiconductor Corporation
Page 2 of 10
11/10/03