FNA22512A Datasheet, PDF (10/15 Pages) Fairchild Semiconductor – 1200 V Motion SPMR 2 Series

Mechanical Characteristics and Ratings
Parameter
Conditions
Device Flatness
See Figure 9
Mounting Torque
Mounting Screw: M4
Recommended 1.0 N • m
See Figure 10
Recommended 10.1 kg • cm
Terminal Pulling Strength Load 19.6 N
Terminal Bending Strength Load 9.8 N, 90 degrees Bend
Weight
Min.
0
0.9
9.1
10
2
-
Typ.
-
1.0
10.1
-
-
50
Max.
+200
1.5
15.1
-
-
-
Unit
mm
N•m
kg • cm
s
times
g
(＋)
(＋)
Figure 9. Flatness Measurement Position
Pre - Screwing : 1 2
2
Final Screwing : 2 1
1
Figure 10. Mounting Screws Torque Order
Notes:
12. Do not over torque when mounting screws. Too much mounting torque may cause DBC cracks, as well as bolts and Al heat-sink destruction.
13. Avoid one-sided tightening stress. Figure 10 shows the recommended torque order for the mounting screws. Uneven mounting can cause the DBC substrate of package to be
damaged. The pre-screwing torque is set to 20 ~ 30% of maximum torque rating.
©2014 Fairchild Semiconductor Corporation
10
FNA22512A Rev. C0
www.fairchildsemi.com