FSA3200 Datasheet, PDF (1/13 Pages) Fairchild Semiconductor – Two-Port, High-Speed USB2.0 Switch with Mobile High-Definition Link (MHL™)

November 2012
FSA3200 —Two-Port, High-Speed USB2.0 Switch with
Mobile High-Definition Link (MHL™)
Features
 Low On Capacitance: 2.7 pF / 3.1 pF MHL / USB
(Typical)
 Low Power Consumption: 30μA Maximum
 Supports MHL Rev. 2.0
 MHL Data Rate: 4.68 Gbps
 V_BUS Powers Device with No V_CC
 Packaged in 16-Lead UMLP (1.8 x 2.6 mm)
 Over-Voltage Tolerance (OVT) on all USB Ports
Up to 5.25 V without External Components
Applications
 Cell Phones and Digital Cameras
Description
The FSA3200 is a bi-directional, low-power, two-port,
high-speed, USB2.0 and video data switch. Configured
as a double-pole, double-throw (DPDT) switch for data
and a single-pole, double-throw (SPDT) switch for ID; it
is optimized for switching between high- or full-speed
USB and Mobile Digital Video sources (MDV), including
supporting the MHL™ Rev. 2.0 specification.
The FSA3200 contains special circuitry on the switch
I/O pins, for applications where the V_CC supply is
powered off (V_CC=0), that allows the device to withstand
an over-voltage condition. This switch is designed to
minimize current consumption even when the control
voltage applied to the control pins is lower than the
supply voltage (V_CC). This feature is especially valuable
to mobile applications, such as cell phones, allowing
direct interface with the general-purpose I/Os of the
baseband processor. Other applications include
switching and connector sharing in portable cell phones,
digital cameras, and notebook computers.
Ordering Information
Part Number
FSA3200UMX
Top Mark Operating Temperature Range
Package
GB
-40 to +85°C
16-Lead, Ultrathin Molded Leadless Package
(UMLP), 1.8 x 2.6 mm
Figure 1. Analog Symbol
All trademarks are the property of their respective owners.
© 2010 Fairchild Semiconductor Corporation
FSA3200 • Rev. 1.0.8
www.fairchildsemi.com