FODB100 Datasheet, PDF (1/8 Pages) Fairchild Semiconductor – SINGLE CHANNEL MICROCOUPLER™

SINGLE CHANNEL MICROCOUPLER™
FODB100
FODB101
DESCRIPTION
The FODB100, FODB101 and FODB102 single channel MICROCOUPLERS™ are all
Pb-free, low profile miniature surface mount optocouplers in a Ball Grid Array (BGA)
package. Each consists of an aluminum gallium arsenide (AlGaAs) infrared emitting diode
driving a silicon phototransistor.
FEATURES
• Low profile package
(1.20mm maximum mounted height)
• Land pattern allows for optimum board space savings
• High Current Transfer Ratio (CTR) at low IF
• Minimum isolation distance of 0.45mm
• High steady state isolation voltage of 2500V_rms
• Data rates up to 120Kbit/s (NRZ)
• Minimum creepage distance of 2mm
• Wide operating temperature range of -40°C to +125°C
• Available in tape and reel quantities of 3000 units
• Applicable to Pb-free Infrared Ray reflow (260°C max)
• UL, C-UL approved; VDE pending
APPLICATIONS
• Primarily suited for DC-DC converters
• For ground loop isolation, signal to noise isolation
Communications – chargers, adapters
Consumer – appliances, set top boxes
Industrial – power supplies, motor control
FODB102
SCHEMATIC
ANODE 1
CATHODE 2
4 COLLECTOR
3 EMITTER
2.50
1
2
PACKAGE DIMENSIONS
3.50 ± 0.10
A
4
3
B
0.65 MAX
2.50
3.50 ± 0.10
BALL #1
INDICATOR
4
3
BOTTOM VIEW
Ø
0.98
0.80
MAX
MIN
1
2
TOP VIEW
0.10 C B A
(Ø2.30)
0.35 MAX
0.25 MIN
1.20 MAX
C
SEATING
PLANE
0.85 MAX
0.68 MIN
0.10 C
NOTES: UNLESS OTHERWISE SPECIFIED
A) ALL DIMENSIONS ARE IN MILLIMETERS.
B) NO JEDEC REGISTRATION REFERENCE AS
OF NOVEMBER 2002.
© 2004 Fairchild Semiconductor Corporation
Page 1 of 8
8/19/04