FIN1104 Datasheet, PDF (1/6 Pages) Fairchild Semiconductor – LVDS 4 Port High Speed Repeater

January 2002
Revised January 2003
FIN1104
LVDS 4 Port High Speed Repeater
General Description
This 4 port repeater is designed for high speed intercon-
nects utilizing Low Voltage Differential Signaling (LVDS)
technology. The FIN1104 accepts and outputs LVDS levels
with a typical differential output swing of 330 mV which pro-
vides low EMI at ultra low power dissipation even at high
frequencies. The FIN1104 provides a V_BB reference for AC
coupling on the inputs. In addition the FIN1104 can directly
accept LVPECL, HSTL, and SSTL-2 for translation to
LVDS.
Features
s Greater than 800 Mbps data rate
s 3.3V power supply operation
s 3.5 ps maximum random jitter and 135 ps maximum
deterministic jitter
s Wide rail-to-rail common mode range
s LVDS receiver inputs accept LVPECL, HSTL, and
SSTL-2 directly
s Ultra low power consumption
s 20 ps typical channel-to-channel skew
s Power off protection
s > 7.5 kV HBM ESD Protection
s Meets or exceeds the TIA/EIA-644-A LVDS standard
s Available in space saving 24-Lead TSSOP package
s Open circuit fail safe protection
s V_BB reference output
Ordering Code:
Order Number Package Number
Package Description
FIN1104MTC
MTC24
24-Lead Thin Shrink Small Outline Package (TSSOP), JEDEC MO-153, 4.4mm Wide
Devices also available in Tape and Reel. Specify by appending suffix letter “X” to the ordering code.
Pin Descriptions
Connection Diagram
Pin Name
Description
R_IN1+, R_IN2+,
R_IN3+, R_IN4+
Non-inverting LVDS Input
R_IN1−, R_IN2−,
R_IN3−, R_IN4−
Inverting LVDS Input
D_OUT1+, D_OUT2+, Non-inverting Driver Output
D_OUT3+, D_OUT4+
D_OUT1−, D_OUT2−, Inverting Driver Output
D_OUT3−, D_OUT4−
EN
Driver Enable Pin for All Output
EN
V_CC
GND
V_BB
Inverting Driver Enable Pin for all Outputs
Power Supply
Ground
Reference Voltage Output
© 2003 Fairchild Semiconductor Corporation DS500656
www.fairchildsemi.com