FAN2106_09 Datasheet, PDF (1/15 Pages) Fairchild Semiconductor – 3-24V Input, 6A, High-Efficiency, Integrated Synchronous Buck Regulator

August 2009
FAN2106 — TinyBuck™
3-24V Input, 6A, High-Efficiency,
Integrated Synchronous Buck Regulator
Features
ƒ 6A Output Current
ƒ Wide Input Range: 3V - 24V
ƒ Output Voltage Range: 0.8V to 80% VIN
ƒ Over 95% Peak Efficiency
ƒ 1% Reference Accuracy Over Temperature
ƒ Programmable Frequency Operation: 200KHz to
600KHz
ƒ Fully Synchronous Operation with Integrated
Schottky Diode on Low-Side MOSFET Boosts
Efficiency
ƒ Internal Bootstrap Diode
ƒ Internal Soft-Start
ƒ Power-Good Signal
ƒ Starts on Pre-Biased Outputs
ƒ Accepts Ceramic Capacitors on Output
ƒ External Compensation for Flexible Design
ƒ Programmable Current Limit
ƒ Under-Voltage, Over-Voltage, and Thermal
Protections
ƒ 5x6mm, 25-Pin, 3-Pad MLP Package
Applications
ƒ Servers & Telecom
ƒ Graphics Cards & Displays
ƒ Computing Systems
ƒ Point-of-Load Regulation
ƒ Set-Top Boxes & Game Consoles
Description
The FAN2106 TinyBuck™ is a highly efficient, small-
footprint, constant-frequency, 6A, integrated
synchronous buck regulator.
The FAN2106 contains both synchronous MOSFETs
and a controller/driver with optimized interconnects in
one package, which enables designers to solve high-
current requirements in a small area with minimal
external components. Integration helps to minimize
critical inductances, making component layout
simpler and more efficient compared to discrete
solutions.
The FAN2106 provides for external loop
compensation, programmable switching frequency,
and current limit. These features allow design
flexibility and optimization. High-frequency operation
allows for all-ceramic solutions.
The summing current-mode modulator uses lossless
current sensing for current feedback and over-current
protection. Voltage feedforward helps operation over
a wide input voltage range.
Fairchild’s advanced BiCMOS power process,
combined with low-RDS(ON) internal MOSFETs and a
thermally efficient MLP package, provide the ability to
dissipate high power in a small package.
Output over-voltage, under-voltage, over-current, and
thermal shutdown protections help protect the device
from damage during fault conditions. FAN2106
prevents pre-biased output discharge during startup
in point-of-load applications.
Related Application Notes
AN-8022 — TinyCalc™ Calculator
Ordering Information
Part
Number
Operating
Temperature Range
Package
Eco
Status
FAN2106MPX
FAN2106EMPX
-10°C to 85°C
-40°C to 85°C
Molded Leadless Package (MLP) 5x6mm
Molded Leadless Package (MLP) 5x6mm
Green
Green
For Fairchild’s definition of please visit: http://www.fairchildsemi.com/company/green/rohs_green.html.
Packing Method
Tape and Reel
Tape and Reel
© 2009 Fairchild Semiconductor Corporation
FAN2106 • Rev. 1.1.0
www.fairchildsemi.com