English
Language : 

74F646 Datasheet, PDF (1/9 Pages) NXP Semiconductors – Octal transceiver/register, non-inverting 3-State
March 1988
Revised August 1999
74F646 • 74F646B • 74F648
Octal Transceiver/Register with 3-STATE Outputs
General Description
These devices consist of bus transceiver circuits with 3-
STATE, D-type flip-flops, and control circuitry arranged for
multiplexed transmission of data directly from the input bus
or from the internal registers. Data on the A or B bus will be
clocked into the registers as the appropriate clock pin goes
to a high logic level. Control G and direction pins are pro-
vided to control the transceiver function. In the transceiver
mode, data present at the high impedance port may be
stored in either the A or the B register or in both. The select
controls can multiplex stored and real-time (transparent
mode) data. The direction control determines which bus
will receive data when the enable control G is Active LOW.
In the isolation mode (control G HIGH), A data may be
stored in the B register and/or B data may be stored in the
A register.
Features
s Independent registers for A and B buses
s Multiplexed real-time and stored data
s 74F648 has inverting data paths
s 74F646/74F646B have non-inverting data paths
s 74F646B is a faster version of the 74F646
s 3-STATE outputs
s 300 mil slim DIP
Ordering Code:
Order Number Package Number
Package Description
74F646SC
M24B
24-Lead Small Outline Integrated Circuit (SOIC), JEDEC MS-013, 0.300 Wide
74F646MSA
MSA24
24-Lead Shrink Small Outline Package (SSOP), EIAJ TYPE II, 5.3mm Wide
74F646SPC
N24C
24-Lead Plastic Dual-In-Line Package (PDIP), JEDEC MS-100, 0.300 Wide
74F646BSC
M24B
24-Lead Small Outline Integrated Circuit (SOIC), JEDEC MS-013, 0.300 Wide
74F646BSPC
N24C
24-Lead Plastic Dual-In-Line Package (PDIP), JEDEC MS-100, 0.300 Wide
74F648SC
M24B
24-Lead Small Outline Integrated Circuit (SOIC), JEDEC MS-013, 0.300 Wide
74F648SPC
N24C
24-Lead Plastic Dual-In-Line Package (PDIP), JEDEC MS-100, 0.300 Wide
Devices also available in Tape and Reel. Specify by appending the suffix letter “X” to the ordering code.
© 1999 Fairchild Semiconductor Corporation DS009580
www.fairchildsemi.com