74ABT16541 Datasheet, PDF (1/8 Pages) NXP Semiconductors – 16-bit buffer/line driver 3-State

July 1996
Revised May 2005
74ABT16541
16-Bit Buffer/Line Driver with 3-STATE Outputs
General Description
The ABT16541 contains sixteen non-inverting buffers with
3-STATE outputs designed to be employed as a memory
and address driver, clock driver, or bus oriented transmit-
ter/receiver. The device is byte controlled. Individual
3-STATE control inputs can be shorted together for 8-bit or
16-bit operation.
Features
s Separate control logic for each nibble
s 16-bit version of the ABT541
s Outputs sink capability of 64 mA, source capability of
32 mA
s Guaranteed simultaneous switching noise level and
dynamic threshold performance
s Guaranteed latchup protection
s High impedance glitch free bus loading during entire
power up and power down cycle
s Non-destructive hot insertion capability
Ordering Code:
Order Number Package Number
Package Description
74ABT16541CSSC
MS48A
48-Lead Small Shrink Outline Package (SSOP), JEDEC MO-118, 0.300" Wide
74ABT16541CMTD
MTD48
48-Lead Thin Shrink Small Outline Package (TSSOP), JEDEC MO-153, 6.1mm Wide
Device also available in Tape and Reel. Specify by appending the suffix letter “X” to the ordering code.
Logic Symbol
Connection Diagram
Pin Descriptions
Pin Names
Description
OE _n
I₀–I₁₅
O₀–O₁₅
Output Enable Inputs (Active Low)
Inputs
Outputs
© 2005 Fairchild Semiconductor Corporation DS012149
www.fairchildsemi.com