English
Language : 

SP510E Datasheet, PDF (8/43 Pages) Exar Corporation – ULTRA HIGH SPEED MULTIPROTOCOL TRANSCEIVER
SP510E
ULTRA HIGH SPEED MULTIPROTOCOL TRANSCEIVER
REV. 1.0.1
TIMING CHARACTERISTICS
VCC = +4.75 to 5.25V, C1-C4 = 1µF; TAMB = TMIN to TMAX, unless noted. Typical values are at TAMB = +25°C.
PARAMETERS
SYMBOL TEST CONDITIONS
MIN
TYP
MAX
UNIT
HIGH SPEED V.11 / RS-422 (DRIVERS 1, 2 & 3)
Maximum Bit Rate
Driver Rise and Fall Time
tDR, tDF
10-90%
Figure 22 and Figure 36
Driver Propagation Delay Time
tDPHL, tDPLH
CL = 50 pF
Figure 33 and Figure 36
Driver Skew
tDPHL - tDPLHCL = 50 pF
Figure 33 and Figure 36
Driver Channel to Channel Skew
Driver Output Enable Time
Tri-state to Output Low
tDZL
CL = 100 pF, S1 closed
Figure 34 and Figure 37
Driver Output Enable Time
Tri-state to Output High
tDZH
CL = 100 pF, S2 closed
Figure 34 and Figure 37
Driver Output Disable Time
Output Low to Tri-state
tDLZ
CL = 15 pF, S1 closed
Figure 34 and Figure 37
Driver Output Disable Time
Output High to Tri-state
tDHZ
CL = 15 pF, S2 closed
Figure 34 and Figure 37
52
Mbps
6
ns
20
50
ns
3.8
ns
2
ns
100
ns
100
ns
100
ns
100
ns
HIGH SPEED V.11 / RS-422 (RECEIVERS 1, 2 & 3)
Receiver Output Rise / Fall Time
tR, tF
Receiver Propagation Delay
tPHL, tPLH
Receiver Skew
Receiver Channel to Channel Skew
Receiver Output Enable Time
Tri-state to Output Low
tZL
Receiver Output Enable Time
Tri-state to Output High
tZH
Receiver Output Disable Time
Output Low to Tri-state
tLZ
Receiver Output Disable Time
Output High to Tri-state
tHZ
CL = 50 pF
CL = 50 pF
Figure 33 and Figure 38
tPHL - tPLHCL = 50 pF
Figure 33 and Figure 38
CL = 100 pF, S1 closed
Figure 35 and Figure 39
CL = 100 pF, S2 closed
Figure 35 and Figure 39
CL = 15 pF, S1 closed
Figure 35 and Figure 39
CL = 15 pF, S2 closed
Figure 35 and Figure 39
6
ns
20
50
ns
3.8
ns
2
ns
100
ns
100
ns
100
ns
100
ns
8