SP510 Datasheet, PDF (5/37 Pages) Exar Corporation – ULTRA HIGH SPEED MULTIPROTOCOL TRANSCEIVER

REV. 1.0.0
SP510
ULTRA HIGH SPEED MULTIPROTOCOL TRANSCEIVER
DC ELECTRICAL CHARACTERISTICS
Vcc = +4.75V to +5.25V, C1-C4 = 1µF. T_AMB = T_MIN to T_MAX, unless otherwise noted. Typical values are at T_AMB = +25°C
PARAMETERS
SYMBOL
TEST CONDITIONS
MIN.
TYP
MAX
UNIT
Short Circuit Impedance
Fig. 28
135
165
Ω
V.35 RECEIVERS (ALL VALUES MEASURE WITH TERM_OFF = ’0’)
Sensitivity
±100 ±200
mV
Source Impedance
Short-Circuit Impedance
Fig. 30, Z_S = V₂ / V₁ x 50Ω
90
Fig. 31
135
110
Ω
165
Ω
TRANSCEIVER LEAKAGE CURRENT
Driver Output 3-state Current
Drivers disabled, per Fig. 32
500
µA
Receiver Output 3-state Current
Tx and Rx Disabled,
0.4V - Vo - 2.4V
1
10
µA
5