SP510 Datasheet, PDF (14/37 Pages) Exar Corporation – ULTRA HIGH SPEED MULTIPROTOCOL TRANSCEIVER

SP510
ULTRA HIGH SPEED MULTIPROTOCOL TRANSCEIVER
REV. 1.0.0
Pin Name
Pin Number
C1P, C1N
C2P, C2N
VSS1
VDD
72, 69
70, 67
66
73
LOOPBACK#
27
D_LATCH#
23
TERM_OFF
22
NC
24, 76
VCC
VL
GND
GNDV10
V35RGND
26, 64, 71, 77,
80, 84, 88, 98
1, 45
2, 25, 44, 52,
68, 74, 82, 86,
91, 96
58
46
I/O
DESCRIPTION
Charge Pump Signals
I
Charge Pump Capacitor 1 +/- inputs. Connect a 1 µF
capacitor between C1P and C1N pins.
I
Charge Pump Capacitor 2 +/- inputs. Connect a 1 µF
capacitor between C2P and C2N pins.
I
-2xVCC Charge Pump
I
2xVCC Charge Pump
GENERAL CONTROL SIGNALS
I
TTL Loopback mode enable, active low
I
Decoder Latch, active low
I
Termination disable
RESERVED PINS
No Connect
POWER AND GROUND SIGNALS
I
5V supply.
I
Logic I/O Power Supply Input
I
Ground.
I
V.10 Receiver Ground Reference
O
Receiver Termination Reference
NOTE: Pin type: I = Input, O = Output, I/O = Input/output.
14