SP330EEY-L Datasheet, PDF (2/23 Pages) Exar Corporation – SP330E RS-232/RS-485/RS-422 TRANSCEIVER WITH 1.65V-5.5V INTERFACE

SP330E
RS-232/RS-485/RS-422 TRANSCEIVER WITH 1.65V-5.5V INTERFACE
ABSOLUTE MAXIMUM RATINGS
REV. 1.0.0
These are stress ratings only and functional operation of the device at these ratings or any other above those
indicated in the operation sections to the specifications below is not implied. Exposure to absolute maximum
rating conditions for extended periods of time may affect reliability and cause permanent damage to the device.
Supply Voltage V_CC
Logic Interface Voltage V_L
Voltage at TTL Input Pins
Receiver Input Voltage (from Ground)
Driver Output Voltage (from Ground)
Short Circuit Duration, TX out to Ground
Storage Temperature Range
Lead Temperature (soldering, 10s)
Power Dissipation 24-pin TSSOP
(derate 26.0mW/°C above +70°C)
-0.3V to +6.0V
V_L  V_CC
-0.3V to +6.0V
±18V
±18V
Continuous
-65°C to +150°C
+300°C
900mW
CAUTION:
ESD (ElectroStatic Discharge) sensitive device. Permanent damage may occur on unconnected devices
subject to high energy electrostatic fields. Unused devices must be stored in conductive foam or shunts.
Personnel should be properly grounded prior to handling this device. The protective foam should be
discharged to the destination socket before devices are removed.
ESD PROTECTION
TX Output & RX Input Pins
All Other Pins
MIN. TYP. MAX. UNITS
±15
kV IEC 61000-4-2 Airgap
±8
kV IEC 61000-4-2 Contact
±15
kV Human Body Model (HBM)
±3
kV Human Body Model (HBM)
2