XRT75VL00 Datasheet, PDF (15/50 Pages) Exar Corporation – E3/DS3/STS-1 LINE INTERFACE UNIT WITH JITTER ATTENUATOR

REV. 1.0.3
XRT75VL00
E3/DS3/STS-1 LINE INTERFACE UNIT WITH JITTER ATTENUATOR
JITTER ATTENUATOR INTERFACE
PIN #
6
SIGNAL NAME
JA0
TYPE
I
DESCRIPTION
Disable Jitter Attenuator/FIFO Size Select::
In Hardware Mode, this pin along with JA1 pin provides the following functions
in the table below.
7
JA1
8
JA Tx/Rx
JA0
JA1
Operation
0
0
16 bit FIFO
0
1
32 bit FIFO
1
0
Disable Jitter
Attenuator
1
1
Disable Jitter
Attenuator
NOTE: This pin is internally pulled down.
I
Disable Jitter Attenuator/FIFO Size Select:
In Hardware Mode, this pin along with JA0 pin provides the functions in the
table above.
NOTE: This pin is internally pulled down.
I
Jitter Attenuator Select:
In Hardware Mode setting this pin “High” selects the Jitter Attenuator in the
Transmit path and setting “Low” selects in Receive path.
NOTE: This pin is internally pulled down.
13