|
XR33032 Datasheet, PDF (14/19 Pages) Exar Corporation – WIDE SUPPLY 18V TOLERANT RS-485/RS-422 TRANSCEIVERS | |||
|
◁ |
XR33032/35/38
WIDE SUPPLY 18V TOLERANT RS-485/RS-422 TRANSCEIVERS
PIN DESCRIPTIONS
REV. 1.0.0
PIN NUMBER PIN NAME TYPE
DESCRIPTION
Receiver Output. When RE is low andï
1
RO
Out if (A-B) ï³ -50mV, RO is high.ï
If (A-B) ï£ -200mV, RO is Low.
Receiver Output Enable (Hot Swap).
2
RE
In When RE is low, RO is enabled. When RE is High,
RO is high impedance. When RE is high and DE is
low, shutdown mode is enabled.
Driver Output Enable (Hot Swap).
3
DE
In When DE is high, outputs are enabled. When DE is
low, outputs are high impedance. When DE is low
and RE is high, shutdown mode is enabled.
Driver Input.
With DE high, a low level on DI forces non-Inverting
4
DI
In output low and inverting output high. Similarly, a
high level on DI forces non-Inverting output high
and inverting output low.
5
GND
Pwr Ground.
6
A
I/O
Non-Inverting Receiver Input andï
Non-Inverting Driver Output.
7
B
I/O
Inverting Receiver Input andï
Inverting Driver Output.
8
VCC
Pwr
Power Supply Input.ï
Bypass to ground with 0.1 µF capacitor.
14
|
▷ |