EHP-A22-KM35H-P01-35K Datasheet, PDF (20/29 Pages) Everlight Electronics Co., Ltd – LM-80 Certified

DATASHEET
EHP- A22
1W/5S Series
Precautions of Use
Over-Current-Protection
 Though the Everlight A22 has an ESD protection mechanism, customers must not use the
device in reverse bias condition and should apply resistors for extra protection. Otherwise
slight voltage shifts may cause significant current changes and may cause failure.
Storage
 Before the package is opened: The LEDs should be stored at 30°C or less and 50%RH or
less after being shipped from Everlight. The storage life is 6 months. If the LEDs are to be
stored for more than 6 months, they should be stored in a sealed container with a nitrogen
atmosphere and moisture absorbent material.
 After opening the package: The LED's should be stored under 30Ċ or less and 30%RH or
less. The LED should be used within 168hrs (7days) after opening the package. If unused
LEDs remain, they should be stored in moisture proof packages.
 Before using LEDs: The LEDs should be baked under the following conditions: pre-curing at
60±5Ċ for 24 hours.
 Do not stack assemblies containing Everlight A22 LEDs to prevent damage to the optical
surface of LEDs. Forces applied to the optical surface may result in the surface being
damaged.
Revis₂io₀n Cop:yr7ight © 2011, Everlight All Rights Reserved. Release Date: Aug.15.2013. Issue RNoe: lDeHaEs-0e00D18a1t1e:2013-08-_w2_w8 _w13_.e:_v1_e5_r:_l4_ig3_h.0_t.com
LifecyclePhase:
Expired Period: Forever