ALS-PDIC17-57B-TR8_15 Datasheet, PDF (16/21 Pages) Everlight Electronics Co., Ltd – Digital Ambient Light Sensor

DATASHEET
SMD  I²C Digital Ambient Light Sensor
ALS-PDIC17-57B/TR8
Power Supply Decoupling and Layout
The power supply lines must be decoupled with capacitors, 4.7uF and 0.1uF, placed as close to the device package
as possible. The bypass capacitor should have low effective series resistance (ESR) and effective series inductance (ESI),
such as the common ceramic types, which provide a low impedance path to ground at high frequencies to handle transient
currents caused by internal logic switching. ALS-PDIC17-57B is relatively insensitive to layout. Like other I²C devices, it is
intended to provide excellent performance even in significantly noisy environments. There are only a few considerations
that will ensure best performance. Route the supply and I²C traces as far as possible from all sources of noise. The pull up
resister of two line serial bus “SCL” and “SDA” are recommended to be around 4.7Kohm,
2.7V ~ 5.5V
Figure 17 Application Circuit
Revi1si6on _Copy:_rig2_{ht © 2010, Everlight All Rights Reserved. Release Date : 5.27.2013. Issue No:}R_DLe_Sl_-e₀a₀₀s₀e₀₄D₉ at_Re:_e2_v.2013-06-0_w4_w0_w8_.:_e0_v6_e:_r0_li7_g._h0_t.com
LifecyclePhase:
Expired Period: Forever