SGM70XX Datasheet, PDF (9/9 Pages) List of Unclassifed Manufacturers – Pressure independent & temperature compensated

Important Notices
Warning, personal injury
Do not use this product as safety or emergency stop devices or in
any other application where failure of the product could result in
personal injury (including death). Do not use this product for
applications other than its intended and authorized use. Before
installing, handling, using or servicing this product, please
consult the datasheet and application notes. Failure to comply
with these instructions could result in death or serious injury.
If the Buyer shall purchase or use SENSIRION products for any
unintended or unauthorized application, Buyer shall defend, indemnify
and hold harmless SENSIRION and its officers, employees,
subsidiaries, affiliates and distributors against all claims, costs,
damages and expenses, and reasonable attorney fees arising out of,
directly or indirectly, any claim of personal injury or death associated
with such unintended or unauthorized use, even if SENSIRION shall be
allegedly negligent with respect to the design or the manufacture of the
product.
ESD Precautions
The inherent design of this component causes it to be sensitive to
electrostatic discharge (ESD). To prevent ESD-induced damage and/or
degradation, take customary and statutory ESD precautions when
handling this product.
See application note “Handling Instructions” for more information.
Warranty
SENSIRION warrants solely to the original purchaser of this product for
a period of 12 months (one year) from the date of delivery that this
product shall be of the quality, material and workmanship defined in
SENSIRION’s published specifications of the product. Within such
period, if proven to be defective, SENSIRION shall repair and/or
replace this product, in SENSIRION’s discretion, free of charge to the
Buyer, provided that:
 notice in writing describing the defects shall be given to
SENSIRION within fourteen (14) days after their appearance;
 such defects shall be found, to SENSIRION’s reasonable
satisfaction, to have arisen from SENSIRION’s faulty design,
material, or workmanship;
 the defective product shall be returned to SENSIRION’s factory at
the Buyer’s expense; and
 the warranty period for any repaired or replaced product shall be
limited to the unexpired portion of the original period.
This warranty does not apply to any equipment which has not been
installed and used within the specifications recommended by
SENSIRION for the intended and proper use of the equipment.
EXCEPT FOR THE WARRANTIES EXPRESSLY SET FORTH
HEREIN, SENSIRION MAKES NO WARRANTIES, EITHER EXPRESS
OR IMPLIED, WITH RESPECT TO THE PRODUCT. ANY AND ALL
WARRANTIES, INCLUDING WITHOUT LIMITATION, WARRANTIES
OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR
PURPOSE, ARE EXPRESSLY EXCLUDED AND DECLINED.
SENSIRION is only liable for defects of this product arising under the
conditions of operation provided for in the datasheet and proper use of
the goods. SENSIRION explicitly disclaims all warranties, express or
implied, for any period during which the goods are operated or stored
not in accordance with the technical specifications.
SENSIRION does not assume any liability arising out of any application
or use of any product or circuit and specifically disclaims any and all
liability, including without limitation consequential or incidental damages.
No obligation or liability shall arise or grow out of Sensirion’s rendering
of technical advice, consulting, or advice in connection with the design
configurations of the gas meter housing. All operating parameters,
including without limitation recommended parameters, must be
validated for each customer’s applications by customer’s technical
experts. Recommended parameters can and do vary in different
applications. The design configurations of SGM 700x sensor module in
gas meter housings shown in this document are for illustration
purposes only. The design-in and design-in configuration of SGM 700x
sensor modules into gas meter products is customer’s own
responsibility.
SENSIRION reserves the right, without further notice, (i) to change the
product specifications and/or the information in this document and (ii) to
improve reliability, functions and design of this product.
This datasheet replaces and invalidates all previously released
datasheets of SGM7001, SGM7002, SGM7004 and SGM7006.
Copyright © 2001-2015, SENSIRION.
CMOSens^® is a trademark of Sensirion
All rights reserved
REACH and RoHS Statement
The SGM70xx sensor complies with requirements of the following
directives:
 EU Directive 1907/2006/EC concerning Registration, Evaluation,
Authorization and Restriction of Chemicals (REACH)
 EU Directive 2002/65/EC on the restriction of certain hazardous
substances in electric and electronic equipment (RoHS),
OJ01.01.2011
Headquarters and Subsidiaries
SENSIRION AG
Laubisruetistr. 50
CH-8712 Staefa ZH
Switzerland
Sensirion Inc., USA
phone: [phone]
[e-mail]
www.sensirion.com
phone: [phone]
fax:
[phone]
[e-mail]
www.sensirion.com
Sensirion Japan Co. Ltd.
phone: [phone]
[e-mail]
www.sensirion.co.jp
Sensirion Korea Co. Ltd.
phone: [phone]
[e-mail]
www.sensirion.co.kr
Sensirion China Co. Ltd.
phone: [phone]
[e-mail]
www.sensirion.com.cn
Sensirion AG (Germany)
phone: [phone]
[e-mail]
To find your local representative, please visit www.sensirion.com/contact
www.sensirion.com
9/9