SGM7001 Datasheet, PDF (9/9 Pages) List of Unclassifed Manufacturers – Pressure independent & temperature compensated

Important Notices
Warning, personal injury
Do not use this product as safety or emergency stop devices or in any
other application where failure of the product could result in personal
injury (including death). Do not use this product for applications other
than its intended and authorized use. Before installing, handling,
using or servicing this product, please consult the datasheet and
application notes. Failure to comply with these instructions could
result in death or serious injury.
If the Buyer shall purchase or use SENSIRION products for any unintended
or unauthorized application, Buyer shall defend, indemnify and hold
harmless SENSIRION and its officers, employees, subsidiaries, affiliates
and distributors against all claims, costs, damages and expenses, and
reasonable attorney fees arising out of, directly or indirectly, any claim of
personal injury or death associated with such unintended or unauthorized
use, even if SENSIRION shall be allegedly negligent with respect to the
design or the manufacture of the product.
ESD Precautions
The inherent design of this component causes it to be sensitive to
electrostatic discharge (ESD). To prevent ESD-induced damage and/or
degradation, take customary and statutory ESD precautions when handling
this product.
See application note “Handling Instructions” for more information.
Warranty
SENSIRION warrants solely to the original purchaser of this product for a
period of 12 months (one year) from the date of delivery that this product
shall be of the quality, material and workmanship defined in SENSIRION’s
published specifications of the product. Within such period, if proven to be
defective, SENSIRION shall repair and/or replace this product, in
SENSIRION’s discretion, free of charge to the Buyer, provided that:
 notice in writing describing the defects shall be given to SENSIRION
within fourteen (14) days after their appearance;
 such defects shall be found, to SENSIRION’s reasonable satisfaction,
to have arisen from SENSIRION’s faulty design, material, or
workmanship;
 the defective product shall be returned to SENSIRION’s factory at the
Buyer’s expense; and
 the warranty period for any repaired or replaced product shall be
limited to the unexpired portion of the original period.
This warranty does not apply to any equipment which has not been installed
and used within the specifications recommended by SENSIRION for the
intended and proper use of the equipment. EXCEPT FOR THE
WARRANTIES EXPRESSLY SET FORTH HEREIN, SENSIRION MAKES
NO WARRANTIES, EITHER EXPRESS OR IMPLIED, WITH RESPECT TO
THE PRODUCT. ANY AND ALL WARRANTIES, INCLUDING WITHOUT
LIMITATION, WARRANTIES OF MERCHANTABILITY OR FITNESS FOR
A PARTICULAR PURPOSE, ARE EXPRESSLY EXCLUDED AND
DECLINED.
SENSIRION is only liable for defects of this product arising under the
conditions of operation provided for in the datasheet and proper use of the
goods. SENSIRION explicitly disclaims all warranties, express or implied,
for any period during which the goods are operated or stored not in
accordance with the technical specifications.
SENSIRION does not assume any liability arising out of any application or
use of any product or circuit and specifically disclaims any and all liability,
including without limitation consequential or incidental damages. No
obligation or liability shall arise or grow out of Sensirion’s rendering of
technical advice, consulting, or advice in connection with the design
configurations of the gas meter housing. All operating parameters, including
without limitation recommended parameters, must be validated for each
customer’s applications by customer’s technical experts. Recommended
parameters can and do vary in different applications. The design
configurations of SGM 700x sensor module in gas meter housings shown in
this document are for illustration purposes only. The design-in and design-in
configuration of SGM 700x sensor modules into gas meter products is
customer’s own responsibility.
SENSIRION reserves the right, without further notice, (i) to change the
product specifications and/or the information in this document and (ii) to
improve reliability, functions and design of this product.
This datasheet replaces and invalidates all previously released datasheets
of SGM7001, SGM7002, SGM7004 and SGM7006.
Copyright © 2001-2016, SENSIRION.
CMOSens^® is a trademark of Sensirion
All rights reserved
REACH and RoHS Statement
The SGM70xx sensor complies with requirements of the following
directives:
 EU Directive 1907/2006/EC concerning Registration, Evaluation,
Authorization and Restriction of Chemicals (REACH)
 EU Directive 2002/65/EC on the restriction of certain hazardous
substances in electric and electronic equipment (RoHS), OJ01.01.2011
Headquarters and Subsidiaries
SENSIRION AG
Laubisruetistr. 50
CH-8712 Staefa ZH
Switzerland
Sensirion Inc., USA
phone: [phone]
[e-mail]
www.sensirion.com
Sensirion Korea Co. Ltd.
phone: [phone]~3
[e-mail]
www.sensirion.co.kr
phone: [phone]
fax: [phone]
[e-mail]
www.sensirion.com
Sensirion Japan Co. Ltd.
phone: [phone]
[e-mail]
www.sensirion.co.jp
Sensirion China Co. Ltd.
phone: [phone]
[e-mail]
www.sensirion.com.cn
Sensirion Taiwan Co. Ltd.
[e-mail]
www.sensirion.com
To find your local representative, please visit www.sensirion.com/contact
www.sensirion.com
Version 1.2 – July 2016
9/9