DSA8300 Datasheet, PDF (9/26 Pages) List of Unclassifed Manufacturers – Digital Serial Analyzer Sampling Oscilloscope

DSA8300 Digital Serial Analyzer Sampling Oscilloscope
Character- 80C07B ⁶
istic
4.250 Gb/s
5.000 Gb/s
6.144 Gb/s
7.373 Gb/s
8.500 Gb/s
9.953 Gb/s
10.31 Gb/s
10.51 Gb/s
10.66 Gb/s
10.71 Gb/s
11.1 Gb/s
11.3 Gb/s
14.025 Gb/s
14.063 Gb/s
25.78 Gb/s
27.74 Gb/s
28.05 Gb/s
39.81 Gb/s
41.25 Gb/s
43.02 Gb/s
80C08D
■
■
■
■
■
■
■
80C12B ⁷
Opt. F0-F12
■
■
■
■
■
80C12B ⁷
Opt. 10G/
10GP
■
■
■
■
■
■
■
■
80C14
■
■
■
■
■
■
■
■
■
■
80C11B
80C15
■
■
■
■
■
■
■
■
■
■
■
■
■
80C10C ⁸ Opt 80C10C ⁸ Opt 80C10C ⁸ Opt
F1
F2
F3
■
■
■
■
■
■
■
■
■
■
Clock recovery for optical testing
In many optical applications, there is no data clock directly available to provide a reference signal for acquiring the signals from the device under test. In
these situations, it is necessary to recover the clock from the data signal. The Tektronix 8000 Series of sampling oscilloscope products provides a complete
complement of clock recovery solutions to meet this need. Each of these solutions is fully calibrated so that users do not need to do any manual calibration
of the system to take into account any losses due to data pick-off being routed to the input of the clock recovery unit.
Shown below is a clock recovery solutions selection guide with the key specifications for each solution to help you select the solution(s) most appropriate for
your application. For more detailed information on these solutions, see the 80Cxx Optical Sampling Modules datasheet (for clock recovery options integrated
into the 80C07B, 80C08D, or 80C11B ) or the appropriate clock recovery datasheets for stand-alone clock recovery modules or instruments.
Note: The stand-alone clock recovery modules/instruments have electrical inputs and can be used to recover clocks from electrical signals as well as from
the electrical data pick-off outputs from the 80CXX Series optical sampling modules.
Note: Clock recovery is integrated into the optical module and controlled from the Trigger Setup menu of the 8000 Series oscilloscope.
6 _{There are specific reference receiver groupings supported for the 80C07B. See the 80Cxx Optical Module datasheet for detailed information.}
7 _{There are specific reference receiver groupings supported for the 80C12B. See the 80Cxx Optical Module datasheet for detailed information.}
8 _{The clock recovery trigger pick-off (Option CRTP) for the 80C10C can support trigger pick-off for data rates to >43 Gb/s.}
www.tektronix.com 9