DSA8300 Datasheet, PDF (13/26 Pages) List of Unclassifed Manufacturers – Digital Serial Analyzer Sampling Oscilloscope

DSA8300 Digital Serial Analyzer Sampling Oscilloscope
80E10B uncertainty
Test solutions for 100 Gb/s (4 x 25 Gb/s) electrical standards
With the continued increase in high-bandwidth applications, the need to test electrical components, modules and systems at high data rates is proliferating.
An example of such data rates is the CEI 3.0 VSR-28 interface. This interface transfers data over multiple electrical channel at rates up to 28.6 Gb/s. Such
signals place significant performance challenges on the test and measurement equipment used to acquire and analyze the devices under test.
Some of these challenges include:
The need to acquire the signal with excellent signal fidelity - this requirement has several implications for the test instrumentation:
Low instrumentation noise
Low instrumentation jitter
The need to acquire the signal as close to the DUT as possible - thereby reducing signal degradation and potential inter-symbol interference
The need to recover the clock from the data stream to acquire signals under test and to do detailed analysis of these signals.
The DSA8300 with its modular architecture, and its associated modules and accessories, provides all of the components necessary to fully test multi-lane
high bit-rate signals. To simplify configuring a system to test such devices, Tektronix offers the following product bundle:
80B28G - a DSA8300 product bundle for 28 Gb/s applications
This bundle, when used with a DSA8300, provides all of the electrical sampling modules, accessories, and clock recovery capabilities needed to test
applications at rates from 10 Gb/s to 28.6 Gb/s per lane. The bundle includes the following products:
1 ea. 80E09B: dual channel, 70 GHz Remote Electrical Sampling Module
1 ea. 82A04B: Phase Reference Module that supports sub-100 fs instrumentation jitter when used with the 80E09B
1 ea. CR286A: 28.6 GHz clock recovery instrument that supports clock recovery at rates from 150 Mb/s to 28.6 Gb/s
1 ea. 80X01: 1-meter sampling module extender cable used to extend the phase reference module to connect directly to the clock recovery module
1 ea. 80A08 : accessory kit with all of the necessary cables, adapters, DC blocks and other accessories to configure a complete test solution
To extend this solution to test additional lanes in a multi-lane application, simply install additional 80E09B dual channel remote sampling modules.
www.tektronix.com 13