WC-260 Datasheet, PDF (8/8 Pages) List of Unclassifed Manufacturers – Crimping tools and machines

Crimping tools
YRK series hand crimping tools suitable for mass-production
• Crimping work, such as setting contacts to hand tools etc., is facilitated by using a strip contact to improve the productivity.
• A light operation enables to terminate the contact correctly, by adopting straight-ahead crimping.
• A structure, that the carrier of contact doesn't fly off, has been adopted to this tool.
Hand Crimping Tools
YRK Standard type
• When exchanging the crimper, the crimping suitable for
the wire specification can be conducted.
• Anvil is fixed to tool.
Dimensions: 75(W)×314(L)×25(D)mm
Weight: Approx. 800g (When assembling dies)
Contact and Applicable dies
Series Nominal
Contact Model No.
Receptacle
Tab
J1000
Type II
L
SF1F-21 (*) -P0.6
SF1M-21 (*) -M0.6A
Hand crimp
tools

*1
Model No. of
crimper
YRK-1210
LA / LB
LC / LD
S
SJ2F-002GF-P1.0
SJ2M-002GF-M1.0N
YRK-8851
SA / SB
J2000
M
L
SJ2F-01GF-P1.0
SJ2F-21GF-P1.0
SJ2M-01GF-M1.0N
SJ2M-21GF-M1.0N
YRK-8861
MA / MB
YRK-1120
LA / LB
SA / SB
S
SF3F-002 (*) -P2.0
—
YRK-8821
SC / SD
M
J300
SF3F-01 (*) -P2.0
L
SF3F-41 (*) -P2.0
SF3M-01 (*) -M2.0N
SF3M-41 (*) -M2.0N
YRK-8811
MA / MB
MC / MD
YRK-8801
LA / LB
LC / LD
2L
SF3F-71 (*) -P2.0
SF3M-71 (*) -M2.0N
YRK-1071
Note: 1. J1000 Finish(*): T ...... Tin-plated
GC ... Gold-plated
2. J300 Finish(*): GF… Nickel-undercoated, 0.38Жm selective gold-plated
GI… Nickel-undercoated, 0.76Жm selective gold-plated
T ...... Tin-plated
3. The wear of parts is caused by using hand tool repeatedly.
Measure the crimping height daily and conduct periodical inspection of the wearing parts,
such as ratchet, pin and so on.
15
2LA / 2LB
Marking
LA
LB
LC
LD
SA
SB
MA
MB
LA
LB
SA
SB
SC
SD
MA
MB
MC
MD
LA
LB
LC
LD
2LA
2LB
Applicable wire size
AWG
Insulation O.D. (mm)
#22
1.58
KV0.75
1.90
#20
1.76
#18
2.03
#28
1.20
#24
1.43
#24
1.43
#20
1.53 ^*
#22
1.58
#20
1.76
#28
1.20
#24
1.43
#26
1.30
#24
1.11
#24
1.43
#20
1.76
#22
1.58
#20
2.56
#20
1.76
#16
2.35
#18
2.03
#18
2.83
#16
3.10
#14
3.30
*1... Crimper is either the pair of
A and B or the pair of C and D.
*2... When using wire type UL 2517.
Crimping tools
Dies replacement type hand crimping tools
YRK-EX
• High reliability of crimping is provided by choosing the crimper and anvil suitable for the wire specification.
• The crimping die can be easily exchanged by only insertion and extraction of pin.
• Common handle and crimping dies can be stored in One case and it is easy to carry.
Patent pending
Dimensions: 75(W)×314(L)×25(D)mm
Weight: Approx. 800g (When assembling dies)
Dimensions: 376(W)×295(L)×73(D)mm
Contact and Applicable dies
Contact Model No.
Crimper ^*1
Series Nominal
J1000
L
Type II
Receptacle
SF1F-21(*)-P0.6
Tab
SF1M-21(*)-M0.6A
Crimper
Applicable wire size
Model No. _{Die mark}
AWG
Insulation O.D.
(mm)
A
#20
1.76
J1LA / B
B
#18
2.03
C
#22
1.58
J1LC / D
D KV0.75
1.90
Anvil Color mark Common parts
J1LL Yellow green
A
#28
S
SJ2F-002GF-P1.0 SJ2M-002GF-M1.0N J2SA / B
B
#24
1.20
1.43
J2SL
White
A
#24
J2000
M
SJ2F-01GF-P1.0 SJ2M-01GF-M1.0N J2MA / B
B
#20
1.43
1.53 ^*2
J2ML
Purple
A
#22
L
SJ2F-21GF-P1.0 SJ2M-21GF-M1.0N J2LA / B
B
#20
1.58
1.76
+--
Orange
S
SF3F-002 (*) -P2.0
—
A
#28
J3SA / B
B
#24
C
#26
J3SC / D
D
#24
1.20
1.43
1.30
1.11
J3SL
Yellow
Handle unit
Upper pin
Lower pin
Case
A
#24
J3MA / B
M
SF3F-01 (*) -P2.0 SF3M-01 (*) -M2.0N
B
#20
C
#22
J300
J3MC / D
D
#20
1.43
1.76
1.58
2.56
J3ML
Green
A
#20
J3LA / B
B
#16
L
SF3F-41 (*) -P2.0 SF3M-41 (*) -M2.0N
C
#18
J3LC / D
D
#18
1.76
2.35
2.03
2.83
J3LL
Red
A
#16
2L
SF3F-71 (*) -P2.0 SF3M-71 (*) -M2.0N J32LA / B
B
#14
3.10
J32LL
Blue
3.30
Note: 1. J1000 Finish(*): T ...... Tin-plated
GC ... Gold-plated
2. J300 Finish(*): GF… Nickel-undercoated, 0.38Жm selective gold-plated
GI… Nickel-undercoated, 0.76Жm selective gold-plated
T ...... Tin-plated
3. The wear of parts is caused by using hand tool repeatedly.
Measure the crimping height daily and conduct periodical inspection of the wearing parts,
such as ratchet, pin and so on.
*1... Crimper is either the pair of
A and B or the pair of C and D.
*2... When using wire type UL 2517.
16