RFM65W Datasheet, PDF (67/71 Pages) List of Unclassifed Manufacturers – ISM RECEIVER MODULE

ADVANCED COMMUNICATIONS & SENSING
RFM65W
DATASHEET
7.2.2. Manual Reset
A manual reset of the RFM65W is possible even for applications in which VDD cannot be physically disconnected.
should be pulled high for a hundred microseconds, and then released. The user should then wait for 5 ms before using the
chip.
VDD
(input)
> 100 us
High-Z ’’1’’
Wait for
5 ms
High-Z
Chip is ready from
this point on
Figure 35. Manual Reset Timing Diagram
Note whilst is driven high, an over current consumption of up to ten milliamps can be seen on VDD.
7.3. Reference Design
Figure 36. Application Schematic
Tel: [phone] Fax: [phone] E-mail: [e-mail] http:/ / www.hoperf.com
Page 67