G-NICO-018 Datasheet, PDF (6/11 Pages) List of Unclassifed Manufacturers – TSYS01 Digital Temperature Sensor

TSYS01 Digital Temperature Sensor
RESET SEQUENCE
The Reset sequence has to be sent once after power-on. It can be also used to reset the device ROM
from an unknown condition.
SPI
I²C
PROM READ SEQUENCE
The PROM Read command consists of two parts. First command sets up the system into PROM read
mode. The second part gets the data from the system.
Below examples are sequences to read address 3 (command 0xA6).
SPI
I²C
TSYS01 Rev E0.3
www.meas-spec.com
6/10
2012-01-13