10551 Datasheet, PDF (6/13 Pages) List of Unclassifed Manufacturers – Application and Maintenance Program Statguard Low-VOC Dissipative Floor Finish

Equipment needed:
• Push broom
• 1000-1500 RPM burnishing machine
(with a white or beige pad)
• Statfree^® Burnishing Restorer
1. Dry mop the coated area to remove loose dirt from coated
floor.
2. Use a clean untreated string mop to apply a thin coat of
restorer onto floor. Allow it to dry 20 to 40 minutes.
3. Burnish the coated area with a 1000 to 1500 RPM rotary
machine and a clean beige burnishing pad.
4. Dry mop the entire burnished area again.
For additional usage information and a MSDS sheet on
Statfree® Burnishing Restorer, ask for Technical Bulletin
TB-7044.
Statguard^® Low-VOC Dissipative Floor Finish
Physical Properties
Base:
No-zinc Acrylic Polymer
Description:
Aqueous Acrylic Emulsion, Non
hazardous material as defined
in (29 CFR 915.4)
Color:
White liquid, dries clear
Density:
8.56 lbs/gal
Freeze/Thaw Stability:
Exc. 3 Cycles @ -10°C
pH:
7-8
Slip Resistance:
UL Classified* > 0.5 SCOF
Solids:
23%
Solvents:
Water
Thermal Stability:
Exc. 50°C/1 month
Viscosity:
10 cps
Working Humidity:
Range 20-70% RH
*Underwriters Laboratory (UL) tested and classified as slip
resistance only. UL Classification Number SA6524.
Limited Warranty
Desco Industries Inc. expressly warrants that for a period of
one (1) year from the date of purchase, Statguard® Low-VOC
Dissipative Floor Finish product products will be free of defects
in material. Within the warranty period, the material will be
replaced at our option, free of charge. Call our Customer
Service Department at 781-821-8370 or 00 44 (0) 1892-665313
in Europe for a Return Material Authorization (RMA) and proper
shipping instructions and address. You should include a copy
of your original packing slip, invoice, or other proof of purchase
date. Any material under warranty should be shipped prepaid
to the Desco Industries Inc. factory. Warranty replacements will
take approximately two weeks.
Warranty Exclusions
THE FOREGOING EXPRESS WARRANTY IS MADE IN LIEU
OF ALL OTHER PRODUCT WARRANTIES, EXPRESSED AND
IMPLIED, INCLUDING MERCHANTABILITY AND FITNESS
FOR A PARTICULAR PURPOSE WHICH ARE SPECIFICALLY
DISCLAIMED. The express warranty will not apply to defects or
damage due to accidents, neglect, misuse, alterations, operator
error, or failure to properly maintain, clean or repair products.
Limit of Liability
In no event will Desco Industries Inc. or any seller be
responsible or liable for any injury, loss or damage, direct or
consequential, arising out of the use of or the inability to use
the product. Before using, users shall determine the suitability
of the product for their intended use, and users assume all risk
and liability whatsoever in connection therewith.
DESCO INDUSTRIES INC. • 3651 Walnut Avenue, Chino, CA 91710 • [phone] • Web Site: DescoIndustries.com
TB-7055 Page 6 of 13
© 2013 DESCO INDUSTRIES, INC.
Employee Owned