10551 Datasheet, PDF (5/13 Pages) List of Unclassifed Manufacturers – Application and Maintenance Program Statguard Low-VOC Dissipative Floor Finish

5. Allow 20 to 40 minutes drying time before walking on the
cleaned area.
Clean only with Statguard^® Floor Cleaner, do not damp
mop with plain water or with a high alkaline or high residue
cleaner. Using harsh detergents can damage a treated
floor’s static dissipative properties, or can degrade the
finish.
For additional usage information and a MSDS sheet
on Statguard^® Floor Cleaner, ask for Technical Bulletin
TB-7041.
Spray Buff
Regular spray buffing will help to maintain floors treated with
Statfree^® Dissipative Spray Buff at peak performance and
appearance. Spray buffing with Statfree^® Dissipative Spray
Buff will remove light surface soil while reviving the electrical
properties of the treated surface.
SPRAY BUFF SCHEDULE
Figure 8. Spray buffing with Statfree^® Dissipative Spray Buff
3. Lightly spray a small area with the Statfree^® Dissipative
Spray Buff Treat a small area at a time.
4. Buff the sprayed area at 175-300 RPM using a red pad
or at 1000-1500 RPM using a white or beige pad. Buff
area until clean and glossy. All black marks and scuffs
should be removed. The area must be buffed while in a
liquid state.
5. After high speed buffing, dry mop the entire area with an
untreated mop.
Statfree® Burnishing Restorer
Figure 7. Statfree^® Spray Buff: One quart spray bottle,
case of 12
Heavy to moderate traffic floors should be spray buffed once
a week or as needed. Light traffic floors should be spray
buffed as needed. Allow the floor finish to dry for at least
seven days before spray buffing.
Equipment needed:
• Push broom
• 175-1500 RPM buffing machine (with a white or beige
pad)
• Statfree^® Dissipative Spray Buff
1. Always use in a well ventilated area. Wear appropriate
eye protection such as splash goggles and impervious
type protective gloves.
2. Sweep away all loose dirt and contaminants. Do not
spray buff on a dirty floor. If the floor is soiled, first
perform the cleaning procedure using Statguard^® Floor
Cleaner.
Figure 9. Statfree^® Burnishing Restorer: 2.5 gallon
bag-in-box
Statfree^® Burnishing Restorer is a ready to use formulation
that renews the unique protective properties and gloss of
Statguard^® Low-VOC Floor Finish with less of an investment
in time, effort and money. Static decay properties, surface
resistance characteristics and durability of the floor finish
can be extended dramatically. The Restorer extends
the re-coat cycle and significantly reduces the cost of
maintenance.
BURNISHING RESTORER SCHEDULE
Heavy to moderate traffic floors should be treated two to
four times per month. Light traffic floors should be treated
once a month or as needed.
DESCO INDUSTRIES INC. • 3651 Walnut Avenue, Chino, CA 91710 • [phone] • Web Site: DescoIndustries.com
TB-7055 Page 5 of 13
© 2013 DESCO INDUSTRIES, INC.
Employee Owned