EFM32GG380 Datasheet, PDF (50/70 Pages) List of Unclassifed Manufacturers – EFM32GG380 DATASHEET

Alternate
Functionality
0
ADC0_CH3
PD3
ADC0_CH4
PD4
ADC0_CH5
PD5
ADC0_CH6
PD6
ADC0_CH7
PD7
BOOTLOADER_RX PE11
BOOTLOADER_TX PE10
BU_STAT
PE3
BU_VIN
PD8
BU_VOUT
PE2
CMU_CLK0
PA2
CMU_CLK1
PA1
DAC0_N0 /
OPAMP_N0
PC5
DAC0_N1 /
OPAMP_N1
PD7
DAC0_N2 /
OPAMP_N2
PD3
DAC0_OUT0 /
OPAMP_OUT0
PB11
DAC0_OUT0ALT /
OPAMP_OUT0ALT
PC0
DAC0_OUT1 /
OPAMP_OUT1
PB12
DAC0_OUT1ALT /
OPAMP_OUT1ALT
DAC0_OUT2 /
OPAMP_OUT2
PD5
DAC0_P0 /
OPAMP_P0
PC4
DAC0_P1 /
OPAMP_P1
PD6
DAC0_P2 /
OPAMP_P2
PD4
DBG_SWCLK
PF0
DBG_SWDIO
PF1
DBG_SWO
EBI_A00
EBI_A01
EBI_A02
EBI_A03
EBI_A04
PF2
PA12
PA13
PA14
PB9
PB10
Preliminary
...the world's most energy friendly microcontrollers
LOCATION
1
2
3
4
5
6
Description
Analog to digital converter ADC0, input channel number 3.
Analog to digital converter ADC0, input channel number 4.
Analog to digital converter ADC0, input channel number 5.
Analog to digital converter ADC0, input channel number 6.
Analog to digital converter ADC0, input channel number 7.
Bootloader RX
Bootloader TX
Backup Power Domain status, whether or not the system
is in backup mode
Battery input for Backup Power Domain
Power output for Backup Power Domain
PD7
Clock Management Unit, clock output number 0.
PD8 PE12
Clock Management Unit, clock output number 1.
Operational Amplifier 0 external negative input.
Operational Amplifier 1 external negative input.
PC1 PC2 PC3
PD0
PD1
PD0
Operational Amplifier 2 external negative input.
Digital to Analog Converter DAC0_OUT0 /
OPAMP output channel number 0.
Digital to Analog Converter DAC0_OUT0ALT /
OPAMP alternative output for channel 0.
Digital to Analog Converter DAC0_OUT1 /
OPAMP output channel number 1.
Digital to Analog Converter DAC0_OUT1ALT /
OPAMP alternative output for channel 1.
Digital to Analog Converter DAC0_OUT2 /
OPAMP output channel number 2.
Operational Amplifier 0 external positive input.
Operational Amplifier 1 external positive input.
PF0 PF0 PF0
PF1 PF1 PF1
PD1 PD2
PA12 PA12
PA13 PA13
PA14 PA14
PB9 PB9
PB10 PB10
Operational Amplifier 2 external positive input.
Debug-interface Serial Wire clock input.
Note that this function is enabled to pin out of reset, and
has a built-in pull down.
Debug-interface Serial Wire data input / output.
Note that this function is enabled to pin out of reset, and
has a built-in pull up.
Debug-interface Serial Wire viewer Output.
Note that this function is not enabled after reset, and must
be enabled by software to be used.
External Bus Interface (EBI) address output pin 00.
External Bus Interface (EBI) address output pin 01.
External Bus Interface (EBI) address output pin 02.
External Bus Interface (EBI) address output pin 03.
External Bus Interface (EBI) address output pin 04.
2012-09-11 - EFM32GG380FXX - d0039_Rev1.00
50
www.energymicro.com