QBED8145 Datasheet, PDF (5/6 Pages) List of Unclassifed Manufacturers – 5mm IR emitter

QBED8145
5mm IR emitter
3. When using soldering iron, please solder once for less than 5
seconds at a maximum temperature of 300°C. When soldering a row
of LED on a PCB, please do not solder both leads of a LED in
sequence. (Solder all the positive lead first, then all the negative
leads)
4. Do not dip the epoxy encapsulation part of LED into any soldering
paste liquid.
5. After soldering, do not adjust the location of the LED anymore.
When attaching electronic parts to a PCB with LEDs, the curing time for the whole
PCB should be less than 60 seconds, at less than a temperature of 120
Labeling:
Product: QBED8145
Date: 06/03/2011
Version# 1.0
Page 5 of 6