ES0402V014BT Datasheet, PDF (5/8 Pages) List of Unclassifed Manufacturers – AEM GcDiodeTM ESD Suppressors

AEM GcDiode^TM ESD Suppressors
Rev. Apr. 10
Reliability Tests:
Reliability Test
Flexure Strength
Solderability
Soldering Heat Resistance
Life
Thermal Shock
Mechanical Vibration
Mechanical Shock
Salt Spray
Moisture Resistance
Endurance
Test Conditions and Requirements
2 mm bend, meet triggering voltage and clamping voltage
requirements while being bent, and meet leakage current
requirement after bending.
255ºC, 5 seconds
90% coverage min.
260ºC, 10 seconds,
No mechanical damage
Pass ESD test.
100 direct contact discharge level 4, 8kV
No open or short
Pass ESD test
(Except leakage current ≤10µA)
100 cycles between –65℃ and +125℃
No mechanical damage
Pass ESD test
0.4”D.A. or 30G between 5-3000Hz
No mechanical damage
Pass ESD test
1500G, 0.5ms, half-sine shocks
No mechanical damage
Pass ESD test
48 hour exposure
No excessive corrosion
Pass ESD test
10 cycles
No excessive corrosion
Pass ESD test
85℃, 1000 hours, rated voltage
Leakage current less than 100nA
Website: www.aemchina.com