ES0402V014BT Datasheet, PDF (4/8 Pages) List of Unclassifed Manufacturers – AEM GcDiodeTM ESD Suppressors

AEM GcDiode^TM ESD Suppressors
Recommended Temperature Profiles for Soldering:
AEM’s ESD suppressors can be soldered on PCB using wave or reflow
soldering processes.
Rev. Apr. 10
Recommended conditions for hand soldering:
1. Appropriate temperature (max.) of soldering iron tip/soldering time (max.): 280°C /10s or 350°C / 3s.
2. Using hot air rework station with tip that can melt the solder on both terminations at the same time is
strongly recommended. Do not directly contact the chip termination with the tip of soldering iron.
Website: www.aemchina.com