10409 Datasheet, PDF (5/7 Pages) List of Unclassifed Manufacturers – Statguard Conductive Acrylic Paint Application Instructions

Material Safety Data Sheet
Material Safety Data Sheet maybe used to comply with
EC, according to 91/155EC and ANSI Standard Z400.1-1998
Date: June 1, 2008
NFPA Designation 704
Degree of Hazard
4 = Extreme
1 = Slight
Health
(Blue)
1
3 = High
0 = Insignificant
2 = Moderate
Special Hazard
Flammability
1
(Red)
0
0
Reactivity
(Yellow)
STATGUARD^® Conductive Acrylic Paint
1. IDENTIFICATION OF THE PRODUCT and OF THE ENTERPRISE
Chemical name: Paint, Conductive
Manufacturer: Desco Industries Inc.
Emergency Phone: [phone]
One Colgate Way
Fax: [phone]
Canton, MA 02021
U.S.A.
2. INFORMATION ON INGREDIENTS/COMPOSITION
Ingredients
Weight
CAS-No.
Ethylene Glycol Monobutyl Ether* 2.5-10% 111-76-2
n-butanol*
0-2.5%
71-36-3
Mineral Spirits
0-2%
64741-41-9
2-(2-Butoxyethoxy)ethanol
0-1%
112-34-5
2-ethyl-1-Hexanol
0-1%
104-76-7
Ammonium Hydroxide
0-1%
1336-21-6
TLV-value
25 ppm
50 ppm
100 ppm
NE
NE
50 ppm
R-Phrases
R20/21/22-36/38
R10-22-37/38-41-67
R36
R34, R50
*Listed Chemical Subject To Reporting Requirement of SARA Section 313 of Title III
HMIS Rating
Health
1
Flammability 0
Reactivity
0
Personal Protection B
3. HAZARDS IDENTIFICATION
Hazard description:
Not applicable
Information concerning particular hazards for human and environment:
The product does not have to be labeled due to the calculation procedure of the “General Classification guidelines
for preparations of the EU” in the latest valid version.
4. FIRST AID MEASURES
General information:
Eye Contact
Skin Contact
Ingestion
Inhalation
No special measures required.
Flush with water for at least 15 minutes, Consult a Doctor.
Generally the product does not irritate the skin. Wash with soap and water.
Remove contaminated clothing. Consult a physician if any irritation persists.
Induce vomiting, drink 2 glasses of water. Contact a physician.
Move subject to fresh air. Consult a Doctor in case of complaints.
5. EXTINGUISHING MEASURES
Proper Extinguishing Media The National Fire Protection (NFPA) classifies ingredient liquids to be Class B
fires. Therefore, any approved Fire Extinguisher of extinguishing agent may be
used for fighting purpose, e.g. CO2, dry chemical and foam.
Protective Clothing
Wearing of appropriate protective equipment including self-contained breathing
apparatus should be used.
Special Procedures
Water spray may be ineffective. If water is used, fog nozzles are preferable.
Water may be used to cool closed containers to prevent pressure build-up, and
possible auto ignition or explosion when exposed to extreme heat.
6. MEASURES TO EXPOSURE OF PRODUCT
Personal Precautions
Wearing protective clothing. Inhalation protection. Extinguish all ignition sources.
Environmental Precautions Dilute with plenty of water, do not allow entry to sewers or ground water
Cleaning / Collecting ProceduresDike and absorb with liquid binding material (sand, diatomite, sawdust)
7. HANDLING AND STORAGE
Handling
Use in well-ventilated areas; avoid breathing vapors. Keep containers closed
when not in use. Avoid from freezing.
Storage
Storage Temperature: Max. 49°C/120°F-1°C/34°F
Keep from freezing
DESCO INDUSTRIES INC. • 3651 Walnut Avenue, Chino, CA 91710 • [phone] • Fax [phone] • Web Site: DescoIndustries.com
TB-7001 Page 5 of 7
© 2011 DESCO INDUSTRIES INC.
Employee Owned