41725001X-3 Datasheet, PDF (48/70 Pages) List of Unclassifed Manufacturers – PC, DVI, HDMI, VIDEO INTERFACE CONTROLLER FOR TFT PANEL

Left offset
0xF0,
|”O” |”SSS”|
Return “nnn”
“O” = “0x4F or 0x6F”
Set Left Offset command
-------------------------------------------
-
“SSS” = “0x30,0x30,0x30~
0x33,0x46,0x46”
Offset Value (Rang 000~3ff)
“O” – Left Offset Command
“SSS”- Offset Value (pixels)
“nnn”- Return Value(pixels)
e.g Set Left Offset = 100 pixels ( 0x64 (HEX))
RS232 Code: “0xF0 0x4F 0x30 0x36 0x34”
Return Code: “0xF0 0x4F 0x30 0x36 0x34 0x30 0x36 0x34”
Text Window
Horizontal Size
0xF0,
|”X” |”SSS”|
Return “nnn”
“X” = “0x58”
Set Horizontal Size command
-------------------------------------------
-
“SSS” = “0x31,0x45,0x30~
0x37,0x38,0x30”
Horizontal Size Value (Rang
000~3ff)
“X” –Horizontal Size
“SSS”- Size Value (pixels)
“nnn”- Return Value(pixels)
e.g Set Text Window Horizontal Size = 640 pixels ( 0x280 (HEX))
RS232 Code: “0xF0 0x58 0x32 0x38 0x30”
Return Code: “0xF0 0x58 0x32 0x38 0x30 0x32 0x38 0x30”
Background
Transparency
0xF0,
|”B”|”N”|
Return “n”
“B” = “0x42 or 0x62”
Set Transparency command
-------------------------------------------
“N” = “0x30~0x46”
Transparency Value
(Rang 00~0F)
“B” - Transparency command
“N” – Transparency Value
“n”- Return Value
0x00 =opaque
Set background Transparency value is 8
RS232 Code: “0xF0 0x42 0x38”
Return Code: “0xF0 0x42 0x38 0x38”
Text Overlay
Background
On or Off
0xF0,
|”Q”|
“N”
Return “n”
“Q” = “0x51 or 0x71”
Set Background Enable or
Disable ----------------------
“N” = “0x30~0x31”
“B” - command
“1” Turn On Text Overlay
Background
“0” Turn Off Text Overlay
Background
“n”- Return Value
Set background Transparency value is 8
RS232 Code: “0xF0 0x51 0x31”
Return Code: “0xF0 0x51 0x31 0x31”
Please set the "Background Transparency” and "Left offset" commands before the "Send Line"
command.
Specifications subject to change without notice
© Digital View Ltd – Doc Ver 1.7: 23 April, 2014 (SGX-1920_manual.doc)
Page 48 of 70