41725001X-3 Datasheet, PDF (40/70 Pages) List of Unclassifed Manufacturers – PC, DVI, HDMI, VIDEO INTERFACE CONTROLLER FOR TFT PANEL

“m”
“n”
“i” , ss, c, nn
Green level for
selected colour
temperature
“o”, ss, c
0xb5,
nn | “+” | “-” |
“r” | “R” |
“?”
“m”
“n”
“i” , ss, c, nn
“o”, ss, c
Blue level for
selected colour
temperature
0xb6,
nn | “+” | “-” |
“r” | “R” |
“?”
“m”
“n”
“i” , ss, c, nn
Graphic horizontal
resolution enquiry
Graphic vertical
resolution enquiry
Graphic horizontal
sync frequency
enquiry
Graphic vertical
sync frequency
enquiry
“o”, ss, c
0xb7
0xb8
0xb9
0xba
Maximum query *1
Minimum query *1
Set, Source, Temperature
Group, value *1
Query, Source *1
Set the level of the green
channel for the selected colour
temp. =
value/increment/decrement
Reset
Query
Maximum query *1
Minimum query *1
Set, Source, Temperature
Group, value *1
Query, Source *1
Set the level of the blue channel
for the selected colour temp. =
value/increment/decrement
Reset
Query
Maximum query *1
Minimum query *1
Set, Source, Temperature
Group, value *1
Query, Source *1
Horizontal resolution (in pixels)
in 3 digit hex number
Vertical resolution (in lines) in 3
digit hex number
Horizontal sync frequency (in
units of 100Hz) in 3 digit hex
number
Vertical sync frequency (in units
of Hz) in 3 digit hex number and
1 char
c – reference by Color
Temperature
ss - reference by Input main
select(0x98)
Green level for selected colour
temperature
Range : “9””C”-“F””F”
Default : “E””C”
c – reference by Color
Temperature
ss - reference by Input main
select(0x98).
Blue level for selected colour
temperature.
Range : “9””C”-“F””F”
Default : “E””C”
c – reference by Color
Temperature
ss - reference by Input main
select(0x98).
“nnn” = horizontal resolution
“nnn” = vertical resolution
“nnn” = horizontal frequency
“nnnn” = vertical frequency
nnn = 3 digit hex
c= “i” or “p”
interlace or Progressive
OSD status
enquiry
0xbb
Status of OSD
Display Video
Source Select
0xbc,
“?” |
“0” |
“1”
OSD turn off
0xbd
Display Video source select
Query
Name of video source not
displayed.
After switching to a new video
source, the name of the video
source is displayed for 5
seconds.
Turn off the OSD.
Set gamma data
for user defined
gamma curve
0xbf, mm, c, “?”
0xbf, “R” | “r”
0xbf, mm, c, nn
Query gamma data for color c
index mm ( c = 0 for color Red,
c=1 for color Green,
c=2 for color Blue)
Set user gamma curve to linear
Set gamma data for color c
Specifications subject to change without notice
© Digital View Ltd – Doc Ver 1.7: 23 April, 2014 (SGX-1920_manual.doc)
0xba added the interlace(i)
or Progressive(p) feedback.
“0” – OSD turned off
“1” – OSD turned on
“2” – Text Overlay on
“3” – Display Mark on
“4” – Screen Marker on
“0” – Disabled.
“1” – Enabled.
“0” – fail.
“1” – successful.
“nn” = gamma data
“1”
“nn” = gamma data
Page 40 of 70