RFM63B Datasheet, PDF (41/90 Pages) List of Unclassifed Manufacturers – ISM TRANSCEIVER MODULE V1.1

ADVANCED COMMUNICATIONS & SENSING
RFM63B
5.3. Continuous Mode
5.3.1. General Description
As illustrated in Figure 34, in Continuous mode the NRZ data to (from) the (de)modulator is directly accessed by
the uC on the bidirectional DATA pin . The SPI Data, FIFO and packet handler are thus inactive.
Tx/Rx
Data Rx _SYNC
RECOG.
RFM63B
CONTROL
SPI
CONFIG
DATA
IRQ_0
IRQ_1(DCLK)
NSS_CONFIG
SCK
MOSI
MISO
Datapath
Figure 34: Continuous Mode Conceptual View
5.3.2. Tx Processing
In Tx mode, a synchronous data clock for an external uC is provided on IRQ_1 pin. Its timing with respect to the
data is illustrated in Figure 35. DATA is internally sampled on the rising edge of DCLK so the uC can change logic
state anytime outside the greyed out setup/hold zone.
The use of DCLK is compulsory in FSK and optional in OOK.
Page 41 of 90
Tel: [phone] Fax: [phone] E-mail: [e-mail] http://www.hoperf.com