RF505A Datasheet, PDF (4/5 Pages) List of Unclassifed Manufacturers – SERVCENTER, SERVCENTER II, SERVCENTER RACK

ServCenter Rack and Accessories
The 45U ServCenter Rack, RF535A, stands 86" high and can hold
up to 2000 pounds of equipment. M6 mounting holes accommodate
servers and equipment from multiple vendors. Its depth adjusts
from 30" to 36" in 1" increments.
Choose from two horizontal cable managers, both 19" wide.
Both cable managers are sturdy and made from steel, so they won’t
break under stress. The RF539, top, features a 3" ring depth.
The RF540, bottom, boasts an extra-large 4" ring depth.
You can attach four 3" locking casters from the optional
Caster Kit, RF536, to the base of the ServCenter Rack.
Customize your rack with one of our optional shelves (RF537 and RF538)
in two different depths: 30" or 36". Each shelf supports up to 150 pounds
(RF537 shown).
4
You also can outfit your rack with two Vertical Cable Managers.
The RF541, top, is 70" high and features extra-large cable rings
measuring 6" wide by 4" deep. Install it on one of the ServCenter Rack’s
side panels. The RF542, bottom, also is 70" high and its cable rings
measure 3.6" wide by 2" deep. Install it with the rings facing outward or
to the side. Both cable managers are made of steel.