RF505A Datasheet, PDF (1/5 Pages) List of Unclassifed Manufacturers – SERVCENTER, SERVCENTER II, SERVCENTER RACK

© 2005. All rights reserved.
Black Box Corporation.
Black Box Corporation • 1000 Park Drive • Lawrence, PA 15055-1018 • Tech Support: 724-746-5500 • www.blackbox.com • e-mail: [e-mail]
SERVCENTER, SERVCENTER II, SERVCENTER RACK
Organize your computer and
communications equipment with the
modular and flexible ServCenters
and ServCenter Rack.
RF500A
Key Features
Simple-to-complex
organization, from
server-stacking racks
to complete network
control centers.
Modular, interchange-
able components.
Frames are welded
from 12-gauge steel
tube and hold over
2000 pounds.
Select from frames,
brackets, shelves,
cable managers, etc.
The ideal choices for
organizing computers
and communication
equipment.
1
8/16/2001
#20307
Overview
The ServCenter or ServCenter II
is the ideal choice for
organizing your computers and
communication equipment.
For small to mid-sized networks
with minimal equipment needs,
use a ServCenter II. For larger
networks, try one of the
ServCenters. To store additional
servers and equipment, choose
the ServCenter Rack.
Modular components for your
ServCenter setup include frames,
uprights, work surfaces, brackets,
and bases.
All ServCenter models include
(2) uprights with Vertical Cable
Manager, (1) frame, and (1) work
surface.
All ServCenter II models
include (1) frame, (2) uprights,
(1) work surface, and (2)
electronic/tower shelves.
The ServCenter Rack includes
(1) frame and multiple options for
shelving and cable management.
Frames
Modular and flexible, the
ServCenter has welded steel
frames as its core. All ServCenter
frames are constructed of 1" x
2.75" 12-gauge steel and are 90"
high. And they’re welded for
strength and ease of installation.
Like the ServCenters, the
frame of the ServCenter Rack is
constructed of tough 12-gauge
steel, and it stands 86" high. It’s
welded for superior strength
and is able to hold up to a ton
of equipment. The rack’s frame is
adjustable to depths of 30" or 36".
Please note that frames are
one-piece units and must ship via
motor freight.
Uprights
The uprights that attach to
both sides of the ServCenters’
frames extend a full 12" in front
of the frames, providing an extra
measure of strength and support
for both front-to-back and side-to-
side stability. Designed for heavy-
duty capacity, the uprights offer a
clear strength advantage over
systems with only a bracket foot
or uprights that require crutch
bracing for front-to-back stability.
Heavy-Duty Brackets
With the ServCenter units,
work surfaces are supported
by heavy-duty brackets every 24".
Each work-surface support
attaches to the frame with a 7.5"-
high bracket end that features a
safety tab to prevent accidental
dislodging.
Work Surface
The work surface of the
ServCenters is 29" deep and is
made of 1¹â„4"-thick laminate. It’s
adjustable to a height that’s most
convenient for you.
(continued on page 5)