DC95G104V Datasheet, PDF (4/4 Pages) List of Unclassifed Manufacturers – Thermometrics Thermistors

Type TK95 Specifications
Insulated Lead NTC Interchangeable
Thermistor Chip
Epoxy-coated, NTC interchangeable thermistor chips
with PTFE insulated nickel lead-wires.
Options
Consult Factory for Availability of Options
• Other resistance values in the range of
1000 Ω to 100 kΩ
• Other tolerances or ranges
• Alternative lead wires or lengths
• Non standard R vs T curves
• Controlled dimensions
• Special sensor assemblies or enclosures
Thermal and Electrical Properties
Dissipation Constant
Still air:
1 mW/°C
Stirred oil:
8 mW/°C
Thermal Time Constant
Still air:
10 seconds
Stirred oil:
1 second
Maximum Power at 77°F (25°C)
75 mW
De-rated from 100% at 77°F (25°C) to 0% at 212°F (100°C)
Ø 0.01 in
(0.25 mm)
±0.001
Ø 0.025 in
(0.65 mm)
maximum
0.27 in
(7 mm)
maximum
Ø 0.094 in
(2.4 mm)
maximum
0.195 in (5 mm) ±0.04
Ø 0.094 in
(2.4 mm)
maximum
3 in (76 mm)
NTC Interchangeable Type TK95 dimensions
Ordering Information
Select appropriate part number below for resistance and
temperature tolerance desired.
R_25°C
Material S 32°F to 158°F
System (0°C to 70°C)
±0.18°F (±0.1°C)
2000 F
TK95F202V
2252 F
TK95F232V
3000 F
TK95F302V
5000 F
TK95F502V
10000 F
TK95F103V
10000 Y
TK95Y103V
30000 H
TK95H303V
50000 G
TK95G503V
100000 G
TK95G104V
32°F to 158°F
(0°C to 70°C)
±0.36°F (±0.2°C)
TK95F202W
TK95F232W
TK95F302W
TK95F502W
TK95F103W
TK95Y103W
TK95H303W
TK95G503W
TK95G104W
32°F to 212°F
(0 to 100°C)
±0.36°F (±0.2°C)
TK95F202Z
TK95F232Z
TK95F302Z
TK95F502Z
TK95F103Z
TK95Y103Z
TK95H303Z
TK95G503Z
TK95G104Z
www.ge-mcs.com
920-273C
© 2011 General Electric Company. All Rights Reserved. Specifications are subject to change without notice. GE is a registered trademark of General Electric Company. Other company or product
names mentioned in this document may be trademarks or registered trademarks of their respective companies, which are not affiliated with GE.