DC95G104V Datasheet, PDF (3/4 Pages) List of Unclassifed Manufacturers – Thermometrics Thermistors

Type EC95 Specifications
NTC Interchangeable Thermistor Chip
Epoxy-coated, NTC interchangeable thermistor chips
with bare tinned 180 alloy lead-wires.
Options
Consult Factory for Availability of Options
• Other resistance values in the range of
1000 Ω to 100 kΩ
• Other tolerances or ranges
• Alternative lead-wires or lengths
• Non standard R vs T curves
• Controlled dimensions
• Special sensor assemblies or enclosures
Tinned alloy
180 leads
Ø 0.008 in
(0.20 mm)
2.5 in (63.5 mm)
Epoxy-coated
thermistor chip
Ø 0.095 in
(2.4 mm)
maximum
NTC Interchangeable Type EC95 dimensions
Ordering Information
Select appropriate part number below for resistance and
temperature tolerance desired.
Thermal and Electrical Properties
Dissipation Constant
Still air:
1 mW/°C
Stirred oil:
8 mW/°C
Thermal Time Constant
Still air:
10 seconds
Stirred oil:
1 second
Maximum Power at 77°F (25°C)
75 mW
De-rated from 100% at 77°F (25°C) to 0% at 212°F
(100°C)
R_25°C
2252
3000
5000
10000
10000
30000
50000
100000
Material -4°F to 122°F
System (-20°C to 50°C)
±0.36°F (±0.2°C)
F
EC95F232U
F
EC95F302U
F
EC95F502U
F
EC95F103U
Y
EC95Y103U
H
EC95H303U
G
EC95G503U
G
32°F to 158°F
(0°C to 70°C)
±0.18°F (±0.1°C)
EC95F232V
EC95F302V
EC95F502V
EC95F103V
EC95Y103V
EC95H303V
EC95G503V
EC95G104V
32°F to 158°F
(0 to 70°C)
±0.36°F (±0.2°C)
EC95F232W
EC95F302W
EC95F502W
EC95F103W
EC95Y103W
EC95H303W
EC95G503W
EC95G104W