OBD-M-DB9-F-ES Datasheet, PDF (3/12 Pages) List of Unclassifed Manufacturers – DB9 to OBD-II Adapter Cable

Document Reference No.: ES_000045
OBD-M-DB9-F-ES DB9 to OBDII Adapter Cable Data Sheet
Version 1.01
Clearance No.: #29
1 Introduction
1.1 Functional Description
The DB9 to OBD-II adapter cable is a simple adapter to allow the EasySYNC range of CANbus products to
mate to OBD-II interface connectors commonly used in automotive diagnostics. The DB9 end plugs
directly into the EasySYNC CANPlus modules or any CANbus adapter that conforms to the CAN-in-
Automation (CiA) DS102-2 pin-out. The OBD-II end plugs directly into an automotive diagnostic port.
The cable functions only with the CANbus portion of the OBD-II specification.
Figure 1-1 OBD-M-DB9-F-ES
The Cable incorporates a standard DB9 Female connector and an OBD 16 Pin Male connector for
communication between the EasySYNC CANbus products and OBD-II interface.
The EasySYNC CANbus products can be found at the link below:
http://easysync-ltd.com/categories.php?CategoryID=123
©2010 EasySYNC Ltd.
3